Search results for query: *

I parted out a 2004 Camry and decided to repurpose the scissor jack. (Dwayne's Plymouth is in the background here) I reinforced the pad.... Then using a rubber donut for a pad... No scratches to the underside... Now, I would not use this on any inclined surfaces for risk of the...

Fortunately I have the mechanism. I just need the handle. Can I message you for details?

Thanks for the link, but I think that's a 71. I'll confirm with the seller.

The door latch gear on the driver side of my 66 Plymouth Belvedere at time spins free which causes the door not to shut. You can spin it at times and it will "tighten up" like it should and the door will shut correctly. Is there a fix for this? If not, is it possible to buy only the driver side...

Hey guys, I just picked this up today, I believe it's an original a12 air cleaner, looks to me like the entire base has been cut away. Just wanted to make sure it was an a12 air cleaner and not for something else. Thanks for any info.

A shop did a different set of heads for me, so I didn’t see the guides or heads. The guides were original 1971 that were knurled in the mid 1980’s (fyi)

Yep…ask a different powder coater

Find another powder coater? I had my 65 fury front subframe chemically stripped and powder coated for less than that. Its a lot bigger than your k frame!

I blast with glass, hang and spray gun with a mix of flat and gloss Tremclad that's as factory correct as I can.. https://www.forabodiesonly.com/mopar/threads/1969-dodge-dart-swinger-clean-up.479419/page-6#post-1973288152

I know you've got a photo to share :) On the Plymouth (unlike the Dodge B-bodies), the rear wheel lip is a lot lower and covers almost the entire sidewall to the wheel. That, combined with the taller 275/60/15 tires requires quite a bit of lift to remove the rear wheel/tire. I need to look...

For which year car

Mother Nature drowned out NASCAR Cup practice at the Brickyard today.

Looks like some I've seen after making a pass at the drag strip and cutting the engine clean at the end....

Yes, I want the main four live local networks same schedule as antenna. You can get many live news channels same as networks time with Roku, but not regular scheduled feeds, at least I have not found one. As per the Cordcutter link, I don't want to pay $80 bucks a month just to get locals...

Some 71's have the 70 style gussets with the difference being the breather tube. 71 on the drivers snorkel and 70 on the pass rear. 70's in good shape regularly sell for $250-300. Use this guide to ID it. https://www.nicksgarage.com/aircleaner.htm

That's either really lean or you haven't run it enough to color anything. But it sure doesn't seem to burn oil.

My suggestion is to change them all out, as then you have a complete window sealage and not just the one. Makes perfect sense in the scheme of things with these older MOPARS and keeping them in tip top shape...JMHO...cr8crshr/Bill:usflag::usflag::usflag:

black epoxy primer.....or epoxy primer/black paint I like to rough it up with a sandblast, but epoxy seems to stick to everything

I took my K-member off to finish cleaning the engine compartment and thought I'd reach out to a local guy to see how much it would be to powder coat it. He said $600. I don't want to spend that kind of money so I'm looking for suggestions. What should I use on my K-member? Thanks!

I agree. I carried a small trolley type floor jack for years but then took a scissor jack from a 2004 Camry that I cut up and welded a small pad to it. It weighs 7 lbs and works fine. I used it at the Air Tel in 2024 when a low speed bump knocked my left tailpipe loose from the muffler. For the...