For what it's worth, I didn't have to remove my passenger seat on my '70 Roadrunner non-A/C car. It's actually not that bad of a job. The one...
My Champion cools well, but the fit was terrible. I had to re-drill mounting holes & butcher/modify the hell out of my fan shroud (plastic...
Good points 747. Aren't the compressors "side mounted" too? If yes, wouldn't that allow you to run a six-pack/hemi oval air cleaner and/or an...
Ok, that's a lot of corrosion, so it needs to be flushed at the very least. For basic radiator repair, people have 3 options (listed cheapest to...
Let me start by saying I've never used one of those Classic Industries A/C units. OK, why do you think it will be an "upgrade" to a...
It looks a lot nicer than my Champion radiator for sure
What car are you working on?Top picture --> I would call that a "flapper". Do you have a picture of your broken one? If there's anything left...
I have an idea that's at least worth a shot. If the valve seems to work besides not closing 100%, then my first guess is that it's got some...
SEE ABOVE - I AM WRONG
In most cases you can just add the fan clutch to your existing fan. It disengages when the engine is cold & engages when engine warms up. You...
OK, please school me on this one.... What is the bypass hole?
Here's my 2-cents (I've never run a Be Cool, fyi) 1. Be Cools are "made in North America" (which means USA, Canada or Mexico) based on their...
Good point! Not cooling in traffic is usually a fan problem (or lack of a fan shroud)
I agree with the two guys above. It's a 26" wide radiator, so that's good. It is shaped like a Chrysler aftermarket radiator. It is set up for...
Oh yeah, radiator cap is another thing to check, but you're already on it. I agree with the 1/8" hole in the thermostat to make sure an air...
I'm betting on a plugged up radiator....BUT, I'd suggest 1. Not cooling at idle --> make sure fan clutch (if you have one) only allows you to spin...
My 2-cents....... as long as you're adding the Lucas Super Coolant, use less antifreeze + more distilled water...the more water the better for...
Hey Mike, I believe the cross-flow radiator design is slightly superior. It's something about when the up/down flow radiators get pretty low on...
I'm sure there are others on this board who know more specific information, but I will throw out some general ideas. a. I think you're idea of...
And one more idea along the lines of Khryslerkid's post.... I say this because I made this mistake myself year ago with a *cough* Trans Am. Did...
Separate names with a comma.
