Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not cancelled, but company wrote the policy excluding the roof because it's 25 years old. Another company refused to write a policy due to the old roof.
The M&H harness is a duplicate of the original, so no change in wiring paths. I chose a M&H harness with a parallel path from Alt to Ammeter using an extra hole someone drilled on my firewall. I have an AC car and find i need to run my fan on Medium instead of the default low speed to keep the...
My 69 RR didn't have thru 'pins' but rather 2 channels 4 inches apart where the shafts overlapped. The melted plastic filled the channel all the way around holding the inner/outer shafts together.
To run an accurate continuity check both ends of the wire must be disconnected. You are reading the ground thru the bulbs or other components in the circuit.
Most just disconnect the relay without adverse effects. It can be checked with an ohmmeter amd vacuum pump off thr car. Have you taken it apart to inspect?
You need to read the FSM and understand the wiring diagram. If it doesn't make sense, read it again until it does. Imagine the satisfaction you will have fixing these simple wiring issues without running to your computer asking for help. This is a 5 minute diagnosis job, and another 5 minute...