Search results for query: *

Backfiring thru the exhaust is the result of unburnt fuel in the exhaust mixing with some oxygen. Thru the carb is generally a lean condition. You need to figure out which end it's coming from.

Are you sure you're connect to the correct terminal on the alt? Your picture shows a similar connection on the other side of the alt.

If you take the charger off and it dies you have a battery or battery connection issue at minimum. Current condition is no crank or no start?

I have an 09 Streetglide. Sublime green with some Mopar inspired graphics. Great bike.

Jack the front end up, have someone turn the wheel back and forth while trying to grease.

Drive across the mountain to Maggie Valley, NC. Fantastic motorcycle musuem. Hundreds of bikes on display, all run. White water rafting in the area. Bush Bean manufacturing tour. Tail of the Dragon.

You should be able to add the hardware to your existing seat backs.

Replace the paper with sandpaper.

Clean it up with brake clean, dry, spray with foot powder, look for leak.

Read the Factory Service Manual. You do not need to remove the entire assembly, you can remove the front cover that houses the heater core. It's a bad job but the dash doesn't need to come out. Good luck on getting the glove box insert out, I've never had any luck removing them.

Rich mixture and exhaust leak allowing air in and combustion in the pipes/muffler.

Not everyone's cup of tea. I did read his book and he has an interesting story of how he "made it". And of course, plenty of that show and prices paid are staged....

Why do the moderators allow a member to continually be degraded and harassed by another member? Do better.

Not cancelled, but company wrote the policy excluding the roof because it's 25 years old. Another company refused to write a policy due to the old roof.

The M&H harness is a duplicate of the original, so no change in wiring paths. I chose a M&H harness with a parallel path from Alt to Ammeter using an extra hole someone drilled on my firewall. I have an AC car and find i need to run my fan on Medium instead of the default low speed to keep the...

St Louis Spring. Had mine done in a day. Great product and people to deal with.

I've done what you are considering, I will not do it again and would encourage you not to either.

Yep. Im going to add some aftermarket temp, oil pressure gauges and use the same grommet.

Here ya go.

Looks like you are missing bolts that hold what would be the shift bowl on.