Separate names with a comma.
For street use, I'm not useing the windage tray. The pan has the baffle in it.Measure where your original pickup sits and compare to your new...
When you sit around with your friends and talk about your ailments, just like your parents used to do with their friends when you were a kid. [ATTACH]
You can see how I measured for my pickup, post #15. My pan didn't look like their picture so I'm not sure exactly what I got. My pickup was a bit...
An elderly gentleman goes to his doctor and says "I can't hear with this ear anymore".The doctor looks in his ear, takes a pair of tweezers and...
What was the question again?
What rpm at idle, out of gear?
Happy Birthday @toolmanmike ![ATTACH]
You have to remember that the public can read any of these threads. Except for the Political and Blue Rooms there has to be guidelines.
I think OJ has had more hits to the head than Art Donovan. And this one didn't help much either...[MEDIA]
I use method #2 for cable adjustment, useing a amp meter (2/3rds down the page) Cut a lenth of 1/2 plastic pipe or lenth of wood to hold the...
They are swedged. If you use a press, you'll ruin the holes and possibly bend the hub. Read my thread again.
Would they be swedged studs on the '68 ?[ATTACH] [ATTACH]Post #233 if they are....
Horse Power Sweat !
But can it cut grass? (One of the requirements)And a comment pertaining to the driver....:bananahit:
I already have my set up with stock motor mounts and a Schumacher torque strap. Works great. BTW I found two sets of NOS mounts, made in the USA....
Has anyone ever eliminated all of the electronics on one of these engines and tried running them "old school"? Would it even work?