Search results for query: *

FWIW, here's the specs on my still not completed (due to lack of funds) 571 Bill Mitchell aluminum RB block TF 270 heads based stroker: With the 1.6 ratio T&D rockers it puts the lift in the .665" range

It's ok, no reason to apologize posting in an "old" thread, and I saw that Engine Masters episode and I believe they didn't tweak or tune the Holley 2bbl carbs enough to get the most out of the Wieand 6bbl intake. I've seen a dyno sheet comparisons and older comparisons of the factory dual...

THIS!!! Also, I have had the experience of tuning a 6bbl 440 and a Tripower 421 both for about 10 years. I have no complaints about the vacuum "secondaries" aka outboard carbs performance once I got the center carb dialed in and the outboard carbs idle mixture screws at the ideal mix. Vacuum...

Thanks. My brain is stuck in that "70s" cam description mode, you know, 284° blah blah, the famous (for a hydraulic cam) 292°/.509 etc.

It's yours and your call, of course, but wow man..I could be wrong but that's a good bit smaller than factory stock, right? AND on and stroker at that. Oof! EDIT: I have been educated on the updated (for me stuck in the 70s) cam spec lingo.

The late 70s cast of SNL was SO GOOD, it actually had me home some Saturday nights instead of running the streets in the prime teens of my life... Some Saturday nights.

So I have been "at it" all day working on the first project using Ai that I've been planning with Grok for a few weeks now. I admit the delays and holdups are mostly "on me" BUT it's also in the way Grok works. One of the big differences today, other than me staying on the job at hand is that...

I forgot to expand on the difference. Basically Grok is more of a LLM (LargeLanguageModel) like so MANY other Ai, BUT ManusAi is a general Ai, and that's HUGE, because it actually DOES THINGS! Just as an example, if I ask Grok "How do I _____" Grok will tell me how to do it or direct me to...

I have only watched the video. I'm running Windows 10 on my desktop, and my Surface Pro 4 tablet, so what is the problem w/your 'puter running Framepack?? My tablet is probably better re: RAM and processor than my desktop...

Hey @OneWheelPeel You seem to be the only forum member interested in this thread which I started with the intention of "being informative" vs the other thread on Ai which is more of a "for Ai/against Ai" theme. But then again this IS "the internet" AND an open forum, so as time goes by it may...

I'm not saying that's wrong, but how much ZDDP could wind up in a catalytic converter? I mean it's an oil ingredient so it's a small % of the oil by volume, and then the oil would have to be introduced to the combustion chamber, and post-combustion through the exhaust system, and finally into an...

Just a quick note: That post reminds me of my 79 R/T I got brand new, E58 option (police) 360 4bbl. I had a pair of legendary Cerwin Vega CS-18 6x9 speakers in the rear deck and I needed some great door speakers to attempt to approach their level of performance. I got a pair of EPI rectangular...

I don't recall ever seeing them new, WITH the springs, valves, etc for less than $2,199... I've seen bare TF 240 heads at $1,800 Bare head... I'd wanted a pair for SO long. I finally got the 270s.. Now I just need a car and to finish the 572...

Agreed. I had to delete my pope-post, post haste, so I wouldn't get popped for political pope-posting in the General Discussion forum. :lol:

I'm going to skip most of the posts and say: ¹Best and most flexible: Progression Ignition, hands down, nothing comes close except a full EFI management system. ²FBO ignition system, mine was flawless and was especially helpful with the 6bbl setup. ³Pertronix Ignitor points conversion kits are...

Congratulations big time. Out of ALL the posts of congratulations and so on, THIS is the true victory right here: That is something I will never know, although my dad did some street and track racing in the late 50s to 1965, and quite a few wins, and he and my mom made it to the track to watch...

"Time Vampires"... Shannon Poole at one of 3 what I'd call "home tracks" of mine and my friends, now because of where I live, where they live, Gulfport Dragway in Mississippi, just south of I-10. Nice looking (was) mid 60s Corvette wasn't so aerodynamic on the top end of the track. The "Street...

I actually took your critique to heart and started breaking my posts into paragraphs @Budnicks I do NOT use Ai to post here, which BTW has always 99+% been on a Samsung Galaxy Note phone of one kind or another. :lol::poke:

So last week I had too many days fall victim to "Time Vampires", a term I saw today that perfectly describes about 3 days last week. It all involved packing up 5 ESUs that are heavy, bulky, yet susceptible to shipping damage if not packed well. I made a deal w/another biomed company I've used...

It's hard for me to pick a favorite Kennison gig, and I can't find video or audio on this w/a brief web search, but "Leper whore" had me ROFLMAO