Search results for query: *

Hello I have the Mopar Performance Black Aluminum valve covers on my 440 and the pvc valve grommet has, after 20 years, crapped apart. It is is a 1" OD hole in the cover and the pvc valve is .73". The big thing is the valve cover top is THICK, so it needs to be rather tall, taller than what the...

Sooooooooooo, Hang with me here, I'll be getting to my B body question, just follow along. Just did some checking on oil filters for our 08 Aspen 5.7 and 09 Ram 2500 5.7, from the Bosch web site. They call out a 3334. Went to store and 3334 is about the size of a 3600 style that is for a 3.7 v6...

Hello, This is listed on Craig's list. Just curious on what it is. Will it drop in a 1966 thru 1970 b body ? Any info would be appreciated Thanks

Hello, These torsion bars came out of a 68 gtx that was buried in a Iowa corn field slough. They are pretty pitted. I pulled them anyway, they sat in my garage for several years. Are they more than pry bars now ? I have read if your bars had a gouge in them to file it smooth, these might need to...

Hello, Tore apart and cleaned up, and replaced all bushings, ball joints ect in my 66 charger front end. Now to put it all back together, has anyone found a particular order for reinstalling that is easier or better than the FSM ? Just curious, sometimes the workers in the field know better than...

So, been reading some articles on the newer engine oils having less and less of zddp and or zinc, and the good stuff for older engines that run higher pressure valve Springs than today's motors. I use Quaker State 10w40 in my 440 for years, but I am starting to wonder if I should be adding some...

Hello, 69 Charger 440 4 spd. Non a/c car. Has power steering. 440 built and runs strong, however the belts are driving me nuts. I can roast the tires when ever I want, get some tire squeal, but the belt squeal is as loud. I have the standard factory pulleys, arms, and spacers. So, what needs to...

6

hello What are the tool numbers for a 66 charger upper ball joint and upper control arm bushings ? Are they different than for a 69 charger ? Thanks in advance

Hello, 66 Dodge charger trying to start to get her back together. The K member, mine is fine other than 50 years of oil/dirt on it, so I want to clean it up and shoot with some paint. I could leave it in the engine compartment and clean it up, but that will be a pita. The power steering pump to...

Hello, I have a 66 charger with a 741 8 3/4, I also have a 8 3/4 out of a 70 charger that has a 489. I plan on pulling the 741 out, and putting the 489 in its place. I want to use a clutch type sure grip and plan on 3.73 or 3.55 grear set. I know the 489 and 741 will swap each other out into...

Hello, I have a 1969 charger 8 3/4, 489 case, rear end, with open differential and 3.91 gears. I will be putting this under a 66 charger, with a 383 automatic. I have seen some 481 cases on Craigs list, with sure grips, at some decent prices. I WILL stay with the 489 and its thicker shaft...