Search results for query: *

I put Goodmark on mine and they fit great, AMD are supposed to be the best.

Very nice condition, $400 plus shipping. I am in Windsor Ontario Canada

That is so wrong, stick with the vinyl, these cars look awesome with vinyl roofs or remove the trim, but trim with no vinyl looks horrible.

1968 Dodge Charger R/T Coronet Super Bee Dog Dish Hubcaps Set Of 5 | eBay

Drive it over and I will fix it

Wow this went off the rails

Put a jumper wire across the ballast resistor, if this works your ignition circuit is bad. Check the ballast with a ohm meter.

What is your application?

When you first start it, be carefull the steering wheel might turn by itself really fast. It happened to me and it scared me how fast it turned, I had to adjust the valve on the steering box.

Lower the price from $550 to $450

second pic

It is not as good as I remembered but a very nice driver quality. $125

It is not new but it is in very good condition

I have a orange road runner

Pump with hard to find cooler, small block bracket in great shape. Federal pump. I am in Windsor Ontario Canada. Will ship at your expense. Asking $550 US or make an offer.

Always out, Radial T/A's are the coolest

My seats are finally done, here is some pictures. It was unfortunate what I went through with PUI but in the end it worked out.

Last year I had a starting problem, it turned out that the rod that pushes the fuel pump was too short (worn down) so I would get a little bit of fuel to start then it would die. Changed the rod and it starts like a champ. if you have a Holly you can check the fuel at the bowl levels.

There is 2 circuits one for starting and one for running. If you put a jumper wire across the ballast and it solves your problem then the run wire is dead.