Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
To me. I think the red tins go with the turquoise color engines better than the red tins go with the orange engines and then the orange tins with the orange engines looks best.
This is a set of OEM Big Block Mopar Rocker Shaft Bolts. They
are original, not china knockoffs. They are in good condition,
just need a cleanup. $25.00. Local pickup, or buyer pays shipping.
Tech Tip:
Some 5 gallon paint stirrers are 5/16" hex (or close enough metric, but measure to be sure) and can be bought locally at numerous places. Just cut off the end and wrap some tape where it meets the bushing to avoid damage and off you go.
Here's an example...
Manley 426 Gen II Hemi Rods 7.1" NEW IN BOX - Matched set of 82.2" big end, 1.031 Pin bore, H Beam
Manley Lot No 2580
W/O #: 118567
More than I need for my motors
Power adder capable
Ask $1200.00 USD OBO
If the ad is up, they are available
I see you're using Dot 5.
I've had the same problem with my dual MC 4 drum. It has to be the synthetic that gets past the cap's seal. Just like synthetic motor oil that finds its way past gaskets and seals unlike conventional oils.
I flat sanded the top of the MC with 400 grit and the seal...
I solved the problem by having one of each for my '69 GTX. When I finally bought the car, after chasing it for 50 years, it had an orange tin in place, and a new one still in the box. Because I grew up with the car when it was new, I knew for certain that it came with a red one. I was lucky to...
I think it's how I wrote it. I've taken a picture of how it's indexed to keep the engine timed when all goes back together. Even made a mark on a bracket where the rotor is pointing before removing the distributer. Will pull the gear today (I hope) and Summit says the tool will be delivered...
Yeah, we watched him grow up along side our kids. He was a great character on "The Resident".
It really shocked me to hear how he died. Sharks, Rip currents, man, I'm not going in the ocean!
Rest in peace knowing that so many people loved you Malcolm!
lol, thanks for the comment. Yes, my fan is right against rad, so I’ll look into that method as well. As well, then you would leave motor mounts bolted to block and k frame, and just tip front with jack?
This may be a valid issue, but I still cannot see the value in buying one. Just me I guess but to each their own...cr8crshr/Bill :usflag: :usflag: :usflag:
https://www.yahoo.com/news/study-reveals-unexpected-side-effect-103044204.html