Search results for query: *

Pull all tail light bulbs. Inspect sockets for cracked and broken deformed contacts.

Get a 1157 bulb and socket. Using clip leads wire this across the terminals of the fuse that blows. It will GLOW BRIGHTLY as an indication of a short. Then you can disconnect various harness and look for the glow to go away as you troubleshoot. Keep in mind the sockets themselves can short. The...

Well........the FEL PRO instructions do say "Apply quick drying adhesive", so the Gasket Shellac is probably the correct choice here. Torque to "9 inch pounds"...isn't that 1 Ft pound? I'm going from the Moroso Blue Silicone gaskets back to the Fel Pro VS50145R. Those blue silicone gaskets...

Research shows these are the same gaskets only in a "non performance" package? https://www.oreillyauto.com/detail/c/fel-pro/fel-pro-valve-cover-gasket-set/fel0/vs50145r

It's a big initial investment, but I'm thinking about switching to rinseless car wash (from Griots garage). It's supposed to be the best of both worlds between waterless and traditional bucket and hose. Rinseless Wash

My last drop of Driwash. Almost in tears. I've been using Driwash since 1992. If I were ten years younger I'd get venture capital and buy the driwash rights and start making it again.

Intake manifold leaks?

Installed near ceiling.

My garage is 1130 sq ft and has 12.5 ft ceilings. I have both swamp and a mini split. The mini split is a 3 ton Gree. I was told regardless of brand name all mini split are manufactured by Gree. Anyhow, the mini split works fine on triple digit days IF you keep it on to maintain a temperature...

Mopar Voltage Regulator Upgrade

Although you won't get the waveform replication of the original IVR, you can do the simple LM7805 regulator with three capacitors. Heatsink the LM7805 to the frame of the cluster. Lots of "how to" blogs out there on various ways to mount the regulator.

Leno should move to Texas. Probably 100 grand in auto registrations the People's Republic would miss getting.

Just another day in the People's Republic of California.

I've always wondered how the assembly line installed headliners in around 90 seconds and us DIY guys it takes 6 to 10 hours?

Tried to send you a PM. Your box is blocked.

Muscle car in John DeLorean speak was a grocery getter stripper car with the biggest motor available.

My Shelby Charger had two IAC failures back in the day. I decided to do a failure analysis. I peeled off the rubber boot and found the wires were connected by rivets to a phenolic board. I scratched up the rivets, added some paste flux, and flowed solder. Never had another IAC failures again. I...

The dealer found the restoration book and took a few photos. He said they cannot find the envelope of receipts, but they will keep looking.

CREE Classic Cars is the shipper JJ Motorcars recommended.

He said several times; "... this car is so nice I'm not worried about it selling.......at this price......." I can't get off work for about two weeks and flights aren't convenient nor cheap. I'm still going to try to see the car if it's not sold sometime in the near future.