• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Billccm

    Need help with 69 Charger Instrument cluster problem.

    Fuse should have opened before damage. Check for proper amperage fuses in the block.
  2. Billccm

    Need help with 69 Charger Instrument cluster problem.

    I'd still buy a electronic IVR.......it will protect the circuit board and your gauges.
  3. Billccm

    Need help with 69 Charger Instrument cluster problem.

    I'm not a fan of the old mechanical IVR. The contacts can stick and cause damage. You can also eliminate that condenser when you upgrade the IVR. MOPAR Products
  4. Billccm

    Need help with 69 Charger Instrument cluster problem.

    These circuit boards are phenolic and can develop hairline cracks and the contact pins are just pressfit without solder, which could go high resistance easily. Thinking out loud two gauges have failed. The common connection to these two gauges is 5V power and ground. Try to visually inspect the...
  5. Billccm

    Why does my taillight fuse blow when I turn the lights on?

    Pull all tail light bulbs. Inspect sockets for cracked and broken deformed contacts.
  6. Billccm

    Why does my taillight fuse blow when I turn the lights on?

    Get a 1157 bulb and socket. Using clip leads wire this across the terminals of the fuse that blows. It will GLOW BRIGHTLY as an indication of a short. Then you can disconnect various harness and look for the glow to go away as you troubleshoot. Keep in mind the sockets themselves can short. The...
  7. Billccm

    Valve Cover Gaskets and Sealant??

    Well........the FEL PRO instructions do say "Apply quick drying adhesive", so the Gasket Shellac is probably the correct choice here. Torque to "9 inch pounds"...isn't that 1 Ft pound? I'm going from the Moroso Blue Silicone gaskets back to the Fel Pro VS50145R. Those blue silicone gaskets...
  8. Billccm

    Valve Cover Gaskets and Sealant??

    Research shows these are the same gaskets only in a "non performance" package? https://www.oreillyauto.com/detail/c/fel-pro/fel-pro-valve-cover-gasket-set/fel0/vs50145r
  9. Billccm

    Waterless Car Wash research

    It's a big initial investment, but I'm thinking about switching to rinseless car wash (from Griots garage). It's supposed to be the best of both worlds between waterless and traditional bucket and hose. Rinseless Wash
  10. Billccm

    Waterless Car Wash research

    My last drop of Driwash. Almost in tears. I've been using Driwash since 1992. If I were ten years younger I'd get venture capital and buy the driwash rights and start making it again.
  11. Billccm

    400bb struggle with backfiring [VIDEO]

    Intake manifold leaks?
  12. Billccm

    Mini-split AC for garage.

    Installed near ceiling.
  13. Billccm

    Mini-split AC for garage.

    My garage is 1130 sq ft and has 12.5 ft ceilings. I have both swamp and a mini split. The mini split is a 3 ton Gree. I was told regardless of brand name all mini split are manufactured by Gree. Anyhow, the mini split works fine on triple digit days IF you keep it on to maintain a temperature...
  14. Billccm

    Which Instrument Voltage Regulator for a 66 Coronet 500?

    Mopar Voltage Regulator Upgrade
  15. Billccm

    Which Instrument Voltage Regulator for a 66 Coronet 500?

    Although you won't get the waveform replication of the original IVR, you can do the simple LM7805 regulator with three capacitors. Heatsink the LM7805 to the frame of the cluster. Lots of "how to" blogs out there on various ways to mount the regulator.
  16. Billccm

    California Car exemptions by Jay Leno

    Leno should move to Texas. Probably 100 grand in auto registrations the People's Republic would miss getting.
  17. Billccm

    California Car exemptions by Jay Leno

    Just another day in the People's Republic of California.
  18. Billccm

    Headliner How To

    I've always wondered how the assembly line installed headliners in around 90 seconds and us DIY guys it takes 6 to 10 hours?
  19. Billccm

    FOR SALE 1968 GTX

    Tried to send you a PM. Your box is blocked.
  20. Billccm

    Muscle Cars...

    Muscle car in John DeLorean speak was a grocery getter stripper car with the biggest motor available.
Back
Top