Search results for query: *

Looking for a set of stamped steel wrinkle black HEMI valve covers 70-71 style. PM here - thanks. Pasi

The wording above looks like a "cut and paste" job. A Fury 3 most likely would have come with an 8 3/4" axle with either 2.76 or 2.94 gears. I don't think that they ever came with a Dana 60 and I'm pretty sure that the 1966 models never got a 9 1/4" axle.

Happy Birthday

A few days ago, I checked voltage of the battery. It was 13.06. The car has consistently started and ran normally ever since I replaced the 5 port plug at the ECM. The battery holds a charge and does not seem to drop off like the NAPA battery did. It drops off just sitting on the shelf here. It...

:drinks: :bday::drinks::bday::bday:

That ohm ballast is Race only. It will fry the ecu which is a knockoff if you did not know hence the word "replaces" on the label. Common. Prob Mopar Authorized which means they bought the right to slap Mopar on it! Coil is high also.

Is 1966 Charger steering column different than 1966 Coronet steering column? Thanks

Should not be loose. Loose means it has clearance.

What length do you need?

Carb looks old. Should check the float level. Also, PCV is not hooked up [ large rubber plug between mixture screws ]??? That will mess the idle throttle opening...& idle mixture adjustment.

In the pic of the bal res, it looks like 0.25 ohm, not 25 ohm. 0.25 ohm bal res with a 2 ohm coil would be an odd pairing.

77 was the first of the b body kind

Ha!!

Petty's 6-2. I can attest, I'm 6-0 and I talked to him.

Looks like that’s a hard NO! Kim. @Wcotner96

:D

.