Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I wasn't into them much until I decided that I needed one :lol:
Someone gave me a Ford 1500 that had not run in years. I pulled it out of a field and had it up and running the same day. Just a bad battery cable, incorrectly wired new start switch, and brake adjustment needed to make it...
Maybe it’s just how you write , but it seems like you still don’t understand.
The cam drives the oil pump drive shaft via the gear. The oil pump drive shaft turns the distributor via the slot. To prime the pump. You pull the oil pump drive shaft ( mark it for index.)
the priming tool is just...
Any driveshaft shop can fix you up with what you will need for a yoke or new driveshaft. Some shops prefer to make you a new one vs shortening an old one.
I have the same question for a Portronix II setup with a “Flamethrower” coil. I see MSD has a ballast resistor, can that be used instead of the original?
Also back in the day you put a bottle jack under the motor to tip it down to get clearance for the tranny, it is best to remove at least the radiator shroud, (and probably the radiator) for clearance for the fan as the back of the motor drops. As stated above, real men don't use a jack, even on...
You shouldn't have to remove the aluminum shifter plate. When you get the trans out, take a large drift and hit the 3 plate bolts to shock them, they should come out, except for the ones you have stripped, have to weld a nut onto them.
As far as removing the trans, I always have used a floor...