Search results for query: *

Wish I had a dad with a car like that :(

Congratulations! Sounds like you're a....

I was going to say there's a thread on here somewhere.

Watch out for all the rubber neckers as you're pulling that piece of art down the road!

When you live in this area you learn to wait five minutes for the weather to change.

Op's not the first... TRW power Steering You might find a donor relief valve. Looked up a couple and they range from $60 to $600!

That's screwed up. I guess the guy in the vid screwed up too. I did a Saginaw not long ago and you just tighten it all up tight.

He stated that he had already loosened everything. That's why it appeared it was hand tight.

Factory set might mean you just make it tight and forget about it. Being tight with the spring and check ball should be Factory set. Was everything tight when you took it apart?

At the 5:00 mark...

Happy Birthday to the Man Behind the Curtain!

Jack Skid Plate This Laser cut, CNC bent, 3/16″ aluminum jack skid plate bolts on to the jack in place of the wheels and requires no permanent modifications to the jack. Once installed, the jack skid plate will give you a more stable and much safer way to jack up your vehicle in almost any...

You can tell if it needs adjustment just by sitting in the car with the engine running. Starting in the straight on position with the wheels and steering wheel straight, turn to the left just half a turn then back to center. Then turn a half a turn to the right and back to center. If you feel...

I was thinking a holding device for your car trailer/hauler.

Part #2228 goes on the drivers side. Part #2227 goes on the passenger side.

Hey Superman from back in the day!

I see they lowered Spocks eyebrows over time.