Search results for query: *

No matter where you are on Earth, when you look up in the night sky every star you see belongs to the Milky Way Galaxy!

The human being is the most dangerous, most destructive and most unpredictable animal on this planet. There is no guarantee there will be a civilized population in 200 years. Scientists are already looking for other planets to inhabit (invade) when we use this one up. The next 3 or 4 generations...

Changed spark plugs on my 440 with headers. Didn't hurt at all and only was bleeding twice.

I got out of the Air Force in 75, went through a divorce and married again in 77. The new wife's brother was a dirt track racer and for the next 20 years I was heavily involved in his race team. After I had my fill of racing 2 or 3 nights a week I decided to go fishing. Floating around a lake...

Everyone's Uptown Girl...Christie Brinkley . Still a looker at 70

Not polical at all. It is fact based on public statements and history. Read into it what you will.

The Belvedere. A++ condition driver quality. Non original mild build J code 440. .509/.292/108 cam, 727 trans with shift kit, Edelbrock performer 440 intake, 906 cast iron heads, Holley 3310-3 carb, no name headers, power steering new conversion last fall, manual drum brakes all 4 corners, new...

I buff my Belvedere and DD every spring with Meguiars Ultimate polish. After that the Belvedere gets sealed with Cerakote and the Bronco Sport gets Mothers Hybrid. All three are easy to use and provide a brilliant luster. Jerry

I did that conversion to my 66 Belvedere. The coupler is different between the manual and power, they are different sizes. My Belvedere had a solid 1 piece shaft. Pulling the column is the easiest way to shorten the shaft. After I installed the power box I did a lot of measuring of the manual...

I have long tube headers on my 66 Belvedere/440 and as soon as I get the proper parts purchased the headers are going in the scrap. I have had a belly full of dropping the drivers side header to replace or repair anything on that side. If you have a street cruiser that will rarely see 5,000 rpm...

Check the angle of your clutch fork pivot. Mine was pretty extreme when I finally found it but when it started to crack my clutch pedal would stick half way.

A properly tuned Q-Jet will run as smooth and accelerate as fast as any other piece on the market. Check your plugs, wires, cap etc for problems. Make triple sure there are no vacuum leaks. Don't be real quick to blame the carb for a bad idle. Someone a lot smarter than me once said, 95 % of...

Call Transfer Performance Machine at 724-962-2520 Ted will be able to tell you what you need to know. They are on Rt. 18 in Transfer.

I'm going through the same thing with my 66 Belvedere. From what I have learned there are 2 available for a 66. Oreilly offers a 32 spline, 1 1/8 sector shaft, 5 1/4" center to center length. There is a fast ratio 36 spline, 1 1/8 sector shaft, 7 1/4" center to center. I looked up other b body...

True story. When my 66 Belvedere came to me it had a very healthy 440 with headers plus a new set of Doug's d452 ceramic coated headers. It also came with a bad mini starter. To change the starter I had to drop the driver's side header. That is not as simple as it sounds. First, spark plugs come...

I have a 66 Belvedere ll 440 auto and am changing from manual to power steering. I know the main shaft is shorter on the power steering cars but would rather not cut my original shaft. I have a complete 70 Chrysler non tilt steering column, auto with power steering, and would like to use the...

I agree with the stick with what you have crowd. Go to AutoZone and get a leak down kit from their loaner program and see what the current health of your engine is. If it checks out okay then headers and a 2 1/2 exhaust will give you a great sound and 3.91 or 4.10 rear gears will have you...

I am using a manual choke now so this carb suits my needs. If I see another carb or choke parts I will pass the information on to you

Choke is missing on this carb, someone fabed an arm on the side for a manual choke cable. I was going to search for the choke parts on ebay when I rebuilt it. $60 plus shipping is the best I can do. Jerry

I have a 4175 list 7002-1 I picked up at a swap meet this summer. I was planning on re-building it this winter as a back up for my Belvedere. I will let it go for $60 plus shipping. I can send some pictures to you if interested.