• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. khryslerkid

    Tools Explained

  2. khryslerkid

    Tools Explained

    Jack Skid Plate This Laser cut, CNC bent, 3/16″ aluminum jack skid plate bolts on to the jack in place of the wheels and requires no permanent modifications to the jack. Once installed, the jack skid plate will give you a more stable and much safer way to jack up your vehicle in almost any...
  3. khryslerkid

    Tools Explained

    I was thinking a holding device for your car trailer/hauler.
  4. khryslerkid

    Enclosed trailer floor paint

    I think I would use something with grip in it like some garage floor paints have.
  5. khryslerkid

    Tools Explained

    You would think that's an early set of metrics.
  6. khryslerkid

    Tools Explained

    Someone is always trying to reinvent the Crescent wrench. My kids gave this to me one Father's Day years ago. 2006 date on it. It's battery operated, just use the button on top to open and close it. I keep it in the tool box just for memories. Black and Decker was always coming up with weird...
  7. khryslerkid

    Tools Explained

    He must have drank a lot of Bud Light to try something like that!
  8. khryslerkid

    Damn Jap Jack...

    I had to look at the date on your post! Ya got me :thumbsup:
  9. khryslerkid

    Center section storage box

    It just barely made it from Ohio. The other side was split wide open.
  10. khryslerkid

    Tools Explained

  11. khryslerkid

    Tools Explained

  12. khryslerkid

    Spiders in my shop

    Could have been one of these!.. As reports circulate, the Joro spider invasion is anticipated to continue north, potentially reaching New Jersey later this year. Giant Venomous Flying Spiders Coming To New Jersey
  13. khryslerkid

    Shop safety

    You had me worried after reading halfway through your post. Glad it was a happy ending! I have a main disconnect on my panel as I exit the garage. That gets turned off as I leave. I also have a ball valve between the compressor and dryer that gets turned off when the compressor is not in use...
  14. khryslerkid

    MIG welding wire size question.....

    If there's no rust or dust on it it should be good to go. If it does it will clog up the guide right after the rollers and also the liner. Not good. Even with brand new wire it doesn't hurt to put one of those felt wipers on the wire.
  15. khryslerkid

    MIG welding wire size question.....

    Your wire feed rollers might slip if they're .035 Some rollers can be flipped for different sizes.
  16. khryslerkid

    Axle lube smell

    Suck it up buttercup. :rolleyes:
  17. khryslerkid

    ASTRO PNEUMATIC GOLIATH BALL JOINT XL C-FRAME PRESS

    I've rented them from Advance Auto. Auto Zone has them also. Requires a deposit with a full refund when returned. It's another one of those tools you might use once a year. I removed lower ball joints from a 2500 Ram to pressing out wheel studs.
  18. khryslerkid

    Anyone replace garage door springs themselves?

    Like Ed stated. Been there done that. And I was just adjusting the tension. Dropped one rod while tightening and I was screwed for a moment trying to get the one still in it to a resting place. It's like setting a large rat trap with a hair trigger. Hire a professional!
  19. khryslerkid

    Tools Explained

  20. khryslerkid

    Spiders in my shop

    Get yourself some Spearmint or Peppermint extract and mix it in a spray bottle of water. (Spearmint is found in the candle dept. Walmart and the like) Spray it around the garage, house, windows and doors where they come in from outside. I used to get cobwebs under my car while it's in the...
Back
Top