Search results for query: *

If you're upper control arms are still attached, remove the bump stops under them to allow the lower control arm to drop that much more.

My '62s speedometer was bouncing. Pulled the cable off the back of the speedometer, pulled the cable out and lubed it with Wolfs Head red wheel bearing grease. Fixed the bouncing :thumbsup:

Peppermint or Spearmint extract mixed with water in a spray bottle. Spray it around entrances, around the vehicles. Place a few drops in a safe container and have it in the car. Smells good and mice hate it. Works great for deterring spiders too.

The picture you posted is from an ebay add. How does it compare to your horn ring?

This is a set of thrust buttons with the pin that has been taken apart. The red arrows are the buttons, the blue arrow is the pin that holds them together. The buttons are inserted one on each side. If the pin is broken, one of the buttons could be stuck to the axle when removing or fall out...

An endless picture of beer! :thumbsup:

Locar has a variety of different lenth cables that might work. Maybe @Geoff 2 might remember what he used.

Depending on what transmission you're using. Newer transmissions don't have any provisions for the cables. Something could be made up with the leaver transmissions if that's what you have. If you're converting a pushbutton shifter to a console shifter, you'll need the correct cables. $200 for...

1964 and 1965 did. TORQUEFLITE CONSOLE SHIFT All Chrysler, Dodge, and Plymouth Console Models, whether equipped with automatic or manual transmissions, have gearshift selector levers on the console. The A-727 torqueflite shift lever, in console models, extends through a fore-and-aft slot in...

I have no experience with what new heater core would be good to by other than taking the old one to a radiator shop and that could be more expensive than a new one. Glad you break in went okay.

How much slip yoke is showing with the car sitting on all fours?

Happy Birthday Dennis!

Get the damper replaced before something bad happens. I'm guessing you went to a big block? 440 Source has good prices on new dampers.

Thanks for the update. So you used flat tappet lifters?

Those Radar (or facsimiles) wheels make that MoreDoor look kool Man!

A few more pics from York Pennsylvania

1.3 gallons in a liter. 2.6 gallons = 10.4 quarts. :)