Search results for query: *

Problem solved! The center carb was pulling air trough the Hot idle compensator valve, When i pulled the Carb apart there was a blown cork gasket, I replaced it with an O-ring (rubber gasket) and it felt nice and tight but wasnt. I tried and plugget the valve totally and now it runs really...

Oh yeah, maybe ran out of threads before geting enough pressure on gasket

Thanks for answers, I really appreciate it! Pulled center carb and found this, Is that my vaccum leak makeing airflow to high? How does this happen to a new gasket?

Got no vacuum gauge available right now

I have rebuilt my sixpack on the 440 and iam Having some issues, engine starts fine with a little gas. idle is worried and dies when cold. I can get it steady by putting my hand on the tower. the center Carb is hushing very loud. my thought is a massive vacuum leak , but cant find any ?? the...

What does it do ?

Hey! I am rebuilding my sixpack and wondering what is that black piece in top of meteringblock? its broken and there was none in the restore kit i bought. another question, back side of tower is a port, gasket is blow, whats this port for ?

it seems impossiple to get hold of right-ported cylinders, i`ve tried ordering a couple aftermarkets but all is out of stock. so i am switching too a left-ported with same Bore and new brakelines

The underside only says G1 Thanks ! thats really valuble information for me!

This is in my Charger -69 Anyone know what kind of master cylinder and Where to find rebuild kit? Or maybe new cylinder ? booster says 18268 outlets is on right side from drivers position. Got small leak of brakefluid.

OT When Staying out of town in a hotell one night, some one stabbed my plastic tank on my 90` Volvo to steal gas. noticed it when filling up on a gasstation,got gas on my shoes, me And my girlfriend took 10 chewinggums each and started chewing, then Pressed the gum in the hole, it whent Bone...

Yes thank you, thats some intresting info

Tried to weld the neck with MMA without succes to my low welding experience and thin material. took it to a friend, he fixed it with the MIG. new sending unit is in, tank is up, some color on the neck and then fill her up! Thanks!

I used a 1/2 inch nut, feels like the Sheetmetal Will give in before the nut do. but i get your point

I Will probably try to fix it before i replace, thanks for all input, i ll need to consider

I went with the rivet nut, it really stuck tight in there, gonna fel safe While driving. thanks !

Dropped the fueltank today om my charger -69 to replace the sending unit and leaking gaskets. I Also have a leak on the filler neck, a tiny hole, looks like Someone stabbed it With a screwdriver. the hole is one inch above the trunk floor So when i fill up i always get som gas in the trunk...

Roof looks original !? Guess its just bad luck i am missing a nut, Gona Check other side, maybe i miss both

Yea maybe i’ll Try this one, thanks