Search results for query: *

I looked on DTM site and it looks the same as what I have but I will order , thanks for chiming in

Trunk issue

I have rebuilt a 73 RR for a friend of mine over the last 2 years and finally its time to stripe it , anyone have photos of the fender stripe as to where it starts back from the head lamp I would appreciate that Also he purchased a trunk weather strip from Classic Ind and tryign to decide how...

updated Photo

Take a good look at this 73 ( very similar ) car I just did for a friend of mine , lots of areas to be aware of on this one and should help you decide if you want to restore make it a driver or parts car https://www.forbbodiesonly.com/moparforum/threads/1973-plymouth-road-runner-resto.180211/

thanks I was happy it came out as well as it did based on what we started with with

I will get one last post when I put the Road Runner decals on , our post office sent them back for a incorrect address so I am heading back to Florida for Red Snapper Season

Buffed out and sent back to owner to be assembled Back to being a Mercury Guy !!!!

Now the Base and Clear , I could not get the clear to lay as flat as I wanted but was planning on sand/Buff with 1500 anyway , VERY VERY Metallic color and it laid out nicely

Okay Fellas , So I blocked the car out and cleaned it again , Used Finish Line Primer Sealer ( Acme/Sherwin William) and then Crossfire Base/Clear , The material laid out decent , you get what you pay for and this product was more than adequate and I highly recommend it So Here we are after...

All blocked out, touched up a few spots, ready to remask and spray

Okay guys I'm back and have been sanding on this 73 B Body finally got it in primer today , hopefully paint next week , Code A5 Silver frost metallic, probably going to use crossfire base/clear coat. Also does anyone have any feedback on where to order RoadRunner stripe kit , Classic has them...

Trying to wrap up a restoration project for a friend and just getting ready to primer body and come to find out front Valance is rust junk , so I am told this needs to be a roadrunner or a Satellite valance from a 73 or 74(?) this car is a 73 Located in Southwestern PA , I am checking with...

Stripe question-- Is there anyplace that makes a masking for the stripe? So I can spray the red and mask it off then get the rest of the color on and clearcoat ? I am heading to my place in Florida for a few months to recover from this car so we are going to be on a commercial break for a while

progress

Little more progress

Progress slow but sure

very nice , wish my project had your body , we are getting ready to pull the glass , you said windshield did not come out easy , I have no interest in saving the glass as we are going to replace front and back , what methods did you use ? I am posted up with my project in this forum also

getting the rear 1/4 inner rebuilt