Search results for query: *

RIP

Bourbon is my favorite.

:rofl: Car keys get in there and scrape out the crusties. Some work better than others. Old worn out keys are easier on the skin. :rofl:

Hi everyone I’m having trouble with my 69 coronet it has a 318 and the trouble I’m having is it’s overheating on trips that are like 20-30 miles it has a new thermostat new upper and lower radiator hoses and new coolant I took the rad out a flushed it and nothing really came out it does have a...

Good deal on the gold @hunt2elk :thumbsup:

You must be talking about the one in post #3?

The housing the socket is pressed into is plastic…….

Hahaha Yes I sent ya pics

Appreciate the warning Don. I'll put the screw in handle on the drill for control. Obviously I have never done this before so any warnings/procedural info is much appreciated. I was looking at the engine Yesterday after completing the oil pump replacement and complete brake job. With a/c and...

@Bee1971 :bday: :bday: :bday:

R.I.P.

For this guy who is crazy about his Plymouths, I sure do think that’s a pretty cool find. :thumbsup: PlymCrazy (Crazy about Plymouths)

I'm not sure modern brake clean will do the job, might want to grab the carb cleaner..

RemCharger, Yes, I have a breather. cosgig, oil pressure is about 55lbs as the engine warms up and it will drop to 45lbs when fully warmed up. Oil pressure never goes below 40lbs.

Could be catching on a ridge or bearing normally they slide easily even with the steel rings

Kroil Oil, PB Blaster, and Marvel Mystery Oil will dissolve your ear wax. Just make sure to rinse each ear afterwards with CRC Brakleen. Do not smoke while using any of the above.

Try R/T Specialties. He has lots of different clips for our old Mopars.

@Bill Monk :bday: :bday: :bday:

I had a bad miss on #8 cylinder on the 440 in my '67 R/T. I traced it to a bad spark plug wire. I replaced it, and everything is good again. I recently had my rear springs re-arched, raising the back end about 2". Checking the headlight beam alignment, I found it was way off, so I adjusted it...