Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had a bad miss on #8 cylinder on the 440 in my '67 R/T. I traced it to a bad spark plug wire. I replaced it, and everything is good again. I recently had my rear springs re-arched, raising the back end about 2". Checking the headlight beam alignment, I found it was way off, so I adjusted it...
But they are DOT legal. They have a DOT number, hence street legal. The 'not intended for highway use' is a legal escape clause in case you get caught in the rain and wipe out.
I go over this with my GF everytime we have ice cream... She doesn't understand how I can eat it so fast, she suffers from brain freeze.... I tell her I'm lucky, you can't freeze what you don't have...
OK guys I'm back with my 727 endplay problem thread and although you all had good suggestions, the problem was not any of them. It was the all new rings and bushings. I sat down and thought about this long and hard. I pulled all the thrust washers out, no difference, then I stumbled upon[...
this looks like a socket for the 1157 bulb with two contacts, i just do not see the ground connector in this picture. I’m actually referring to the back-up light socket which is for the 1156 bulb with one contact. The local auto parts stores do not seem to have a anything in their computers...