Search results for query: *

The Ebay ad states that the part is an aftermarket replacement piece. The original vendor to Chrysler was Introl. If you can find an original, it will will have the Inrol name stamped into the housing along with the PSI rating and most of the time a date code.

@Edward Zeliesko, we do not offer any of the reproduction batteries. You might want to reach out to Battery Central Mall, Jeg's or Summitt. Like most things now, expect a six to twelve week delay in getting one. As I always stress to those in the hobby, support the businesses that support the...

We have a number of businesses being the Restoration Parts and Materials, Dale's Cuda Shop and Quirey Quality Design. Also Jim Kramer will be using a portion of our tent and Frank Pirtz of Die Cast Racing will be bringing some of his pieces as well. I am pretty sure that our setup is the...

At the current time, we are expecting to be vending at the event in the general swap meet area, Just look for the large tent in rows R and S in spots 18 through 33. If any special request for deliveries to the show, please let me know.

Hawk took care of us with some of the food that someone was able to bring over to us. My guys were very impressed with the barbeque sandwiches. So all is good!!!!

Hard to believe that Carlisle 2022 is now just a memory. I am just getting finished up with putting away and inventorying product as we are basically less than three weeks away from the Mopar Nationals in Columbus, OH. For those that were able to attend, I believe that everyone felt that the...

To my knowledge, Kenny is not a member here on this site. I actually reunited the original hood pins and hardware for the car with Kenny at the Carlisle show this past weekend. Even though the car was freshened up by John Dallain and was shown in Building T years ago, Kenny is making the car...

Unfortunately, the material to make these felts has been on back order for over an year for us as we supply the Top Catwhiskers to the other vendors and for retail purposes. If things go as plan, we are hoping that we might actually see the material back in stock in approximately six to eight...

For roof rail or any door seals, originals are always best. For 66-67 B-bodies, Steele makes the most correct profile which results in the best fit. For the vent window application, your limited to Metro on those pieces.

Steele has the best fitting and correct profiles for the 66-67 B-body applications. They are pricey.

Light rain shower now. Should be good until Saturday night when a chance of rain comes back for Sunday. Truck is basically unloaded now time to spread everything out to its proper location.

This will probably be my last posting as I hope to be on the road heading to Carlisle by 10:00 PM tonight. This is my current listing for members that will be attending the show. Hopefully I have not overlooked anyone. I have 66 FBBO members who have responded which I am glad to see. I hope...

Is there any of you FBBO guys attending Carlisle who I do not have you listed. As of this Thursday, July 7th, I have 66 site members attending. Let me know if I have over looked you. @Beeorange, Show Field - GTX @Beep!Beep!, Swap Meet, Spaces CA216-218 @betmarkllc, Show Field - 72 Charger...

No pictures of the engine compartment, so unsure of the firewall. But Chrysler never built a 440 four speed car with air conditioning. So has the dash been changed or does the firewall and floor pan show it to be an AC car or a four speed???

@71dodgechargerrt and @69sunfireGTX, thanks for your response. I have updated the listing.

On a 68 to 70 B-Body hood to radiator seal, there is something like seven ribs molded into the back side of the seal. This would be the side next to the hood. The slick side would be the side that would face the radiator core support. No ribs molded into a 66 to 67 B-Body hood to radiator seal.

Looking back through my notes, 2019 was the first year that we put together the tent activities. For that year, I had 33 members from all of the various FxBO sites registered for the tent activities. For 2020, no information was collected due to all of the unknowns due to the Covid impact...

@Beep!Beep!, I have added you to the listing, I count us at 54 members as of Monday, July 4th. Will we reach 60?

@SureGrip, send me your spaces and I will add you to the listing of members that I have put together for everyone. Our swap meet spaces are in rows H and I in spots 138 through 143, so your just one row over from us. I am also unable to break away from out swap meet activities as well. From...

Ted Stephens will be bringing AMD glass to the show. Other than that, I am unsure of anyone else bringing glass to the show. For most vendors, bringing glass requires a pre-order due to the chance that it gets broken or scratched as space is limited for all of the vendors.