Search results for query: *

My vin would be: 0A134378 OR 0A144378. The body numbers are different from the dash number by 10,000 so which one is on the engine and transmission, I do not know.

Bump

Hi Guys, I am looking for the bolt that holds the Air-Grabber actuator in adjustment. It has a 3/8 head, 3/8" long, 12-24 threads, and a washer that is a little more than 1/2" in diameter. What is on the head...I do not know. I attached puctures, so if you know what the markings are, please...

Hi Guys, I am looking for one or two of the screws that hold the seal to the bottom of the air-grabber box. It has a 5/16 head, 3/4" long, and a roughly 3/4" diameter washer. The head has an AF or F on it. I have not figured out which it is. Does anyone have any extras laying around? PM me...

I started putting some real time into getting things together to get my rear end, front suspension, and other small components together so that it us ready to put on the GTX.

Thanks for the replies guys.

What are you guys using to replace the foam seal that is on the front backing plates for drum brakes? Do you just jam foam in there and trim it out or?

I have been trying to get it confirmed if I am correct on the color, because all I have ever seen that have been restored are silver. Most original ones are rusted pretty badly and you can't really tell.

Guys, I am restoring my original parts for my Air Grabber (70 GTX). Does anyone know what finish is supposed to be on these parts? I have scrubbed down through and found what looks to be like yellow-gold cadmium plating in two of the parts. Is this correct or not?

WTB: 11" x 2 1/2" DRIVER'S side Dana 60 or 8 3/4 backing plate. Must be pit free. PM me here. Thanks

After doing some more research, I found these numbers on a thread over on Moparts.com. B-body 1967-71 Hemi, 440, 440-6, HD, 965/795, same as 964/794, 963/793.

WTB - Looking for a set of 70 Hemi Leaf Springs for a B-body. I think they are 3004-767 & 3004-768. If I am wrong on those numbers please correct me. PM me here. Thanks, Tom

Thanks for all the feedback. I'll use the "square" ones.

Unfortunately the one that is bent is not damaged. Both bent ones came off the same sway bar. There are no marks what so ever on them. They are bent perfectly at the bottom flanges. The other two that are straight, came on another sway bar. I looked in the parts book and they list one...

Ok guys, which is the correct strap for a 70 GTX from Lynchroad? I have 2 different styles of straps. As you can see one style is straight and the other lays to the one side.

I am not sure what is on the heads of the bolts. Plus I know I do not have any for reference.

Looking for cover bolts for a 69 or 70 Dana 60. PM me here.

Could you send me some pictures? Here is my email: trdeppen@comcast.net Thanks, Tom

Looking for a set of pit - free 11" Rear backing plates for a 68 - 70 B body. They must be pit free. What's out there? Pm me here. Thanks for the ad.

Ok guys, I have been trying to figure out what my car takes for a steering box date code. 70 GTX. It is a manual steering car. SPD is 930, so it is Sept. 30, 1969. That should have a date code of D####_ . Correct? The box should have been built in ??? April, May, June, July, of 1969...