• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. furyus

    Upper Control Arm, bushings and Upper & Lower ball joint Recommendations?

    I was planning to use poly bushings. Maybe tubular upper control arms.
  2. furyus

    Upper Control Arm, bushings and Upper & Lower ball joint Recommendations?

    I know this is from February, but I have some input. My lower control arm bushings were replaced about 8 years ago. The car has been down for repairs since 2020. I looked at my lower control arm bushings, and they were split open. Moog brand.
  3. furyus

    Oil pump question

    Hey, I live in Weeki Wachee! Your post tells me what I needed. I was wondering if a high pressure pump would make a difference. I brought up the idle a little, reset timing. It seems good.
  4. furyus

    Oil pump question

    I don't know what the bearing clearances are. I had the machine shop assemble the rotating assembly. Nor does the 440 source website mention whether or not the bearings are grooved. If I idled at 1200, then it would be at a more reasonable pressure.
  5. furyus

    Oil pump question

    Yup, I'm a professional over thinker. After reading all the comments, I feel better.
  6. furyus

    Oil pump question

    I agree. I would be happier with a little more. I will try changing the oil, and then try idle speed, and timing. Then, if I feel the need, I will try a different pump.
  7. furyus

    Oil pump question

    Its a Milodon deep pan. 7 quarts
  8. furyus

    Oil pump question

    I think that this is the way to go. I will try the Melling 63hv. If that doesn't help, I'll bring up the idle.
  9. furyus

    Oil pump question

    I would feel a little better with a safety margin.
  10. furyus

    Oil pump question

    Thanks. This is interesting. I guess I will have to stop worrying about it.
  11. furyus

    Oil pump question

    So, my question is still Are there any pumps that put out better pressure at idle than the generic high volume pump.? Do hydraulic roller lifters cause lower pressure? (Howard's brand).
  12. furyus

    Oil pump question

    Wow, what a great explanation. I already have 20w-50 oil in it. i would be happier if it had another 5 psi. Thanks for taking the time to explain all that.
  13. furyus

    Oil pump question

    I don't know what the bearing clearances are. It was a 440 source kit that was built in 2020.the shop that built the short block is gone. I will go to the 440 source website, and see what type of bearings they gave with the kit.
  14. furyus

    Saginaw pump valve shims? Mopar muscle "Pump it down" article by Richard Ehrenberg questions.

    The Borgeson box needs the higher pressure. I would take the shim out, and ask where you bought it what you can do. I had some problems, and Peter Bergman helped me sort it out.
  15. furyus

    Oil pump question

    It drops below 20psi. I would feel much better with a little more.
  16. furyus

    Oil pump question

    Guys, I have a 505 stroker that is all new. Roller cam, Indy heads. When my engine gets warm, around 190*, the pressure drops below 20 psi at around 800 rpm. This is the same thing that it did with the old 440. I used this pump because it was new. So, I need an oil pump that has higher output...
  17. furyus

    Greatest movie soundtrack.

    Pulp Fiction, Dusk to Dawn
  18. furyus

    Timing set preference

    I was concerned about the fit of the crank gear on the crank, and the keyway. Shouldn't it fit snug?
  19. furyus

    Timing set preference

    I bought a Summit timing set, and the crank gear has some play when on the crankshaft. just enough movement so you'd notice. Aren't they supposed to be a snug fit? If so, I was going to replace it. So, for a 505 inch stroker, what brand would you choose Rollmaster, or Cloyes? It's a 3 bolt cam...
  20. furyus

    Electronic ignition / points ignition / MSD Digital 6A & 6AL

    The blue and brown wires need to be connected together to get 12 volts in start, and run.
Back
Top