• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. gkent

    Seat hinge bolt

    My seats are 100% original 1969 Plymouth B-body buckets. I only took the backs off to replace the big washers which had cracked and broken over the years. I seen to recall the 1/8" washers were on the outer bolts. HOWEVER, my guess is these were installed to take up the slack between the base...
  2. gkent

    Turn Signal Switch Grease?

    Dielectric grease DOES NOT conduct. PERIOD. It with keep out moisture, lubricate and prevent corrosion but it DOES NOT conduct. the terminals must still make good metal-to-metal contact for conductivity.
  3. gkent

    Turn Signal Switch Grease?

    for what purpose ??
  4. gkent

    Could someone explain how air shocks work to a newbie? And possibly how to adjust them?

    Those are a 1900's thing ... it's 2025 now! Drag your *** into this century and toss those things!
  5. gkent

    Seat hinge bolt

    I just put the seats back together on my 69 RR. In addition to the wide fiber washers there were 1/8" thick steel washers on one side of each seat between the frame and those fiber ones. I put a single thinner washer on each side instead to evenly space things.
  6. gkent

    will these buckets work

    Of course they'll work ! I've seen stranger things !!
  7. gkent

    70 RR body plug help.

    I remember those small one's being the worst.
  8. gkent

    70 RR body plug help.

    I used Windex 'cause it dries soon afterwards. Use a socket that fits into the topside and give 'em a tap with a rubber mallet.
  9. gkent

    Scarebird (uscartool.com) B Body Part Numbers

    I that case you can do the DiscoTech conversion with no hassles. Move your hose mounts forward of the control arms and front-mount the calipers. All problems solved. You may also need to get '70 LCAs or weld on the appropriate swap bar brackets for the '70 bar. You can't front-mount the...
  10. gkent

    Scarebird (uscartool.com) B Body Part Numbers

    Doesn't fit well with the 68/69 sway bar location. You have to mount the calipers on the rear like stock - and you run into hose issues. All that is spelled out in the DiscoTech article. Ideally you want the brake lines to cross the steering axis and they won't on a 68/69 - and quite likely not...
  11. gkent

    Scarebird (uscartool.com) B Body Part Numbers

    Disco Tech is not well suited to a 68/69 b body - ask me how I know !!
  12. gkent

    Scarebird (uscartool.com) B Body Part Numbers

    Is this for the 11.75" rotors or the 10.87" ?? They make no mention of caliper brackets !!
  13. gkent

    Headliner Help!

    Contact cement. Clip it to position it only. Once glued - no clips
  14. gkent

    Headliner Help!

    ??? What's the point of the clips ??? You spray both surfaces with glue, wait a couple minutens then stick 'em together. No clips !!!
  15. gkent

    Tor Red vs. Hemi Orange

    Hmmm, I didn't think Tor-red and Hemi orange were the same. I think Hemi orange and Vitamin C were the same.
  16. gkent

    Knocking sound with manual trans

    Not me, I'm Canadian !!!
  17. gkent

    Knocking sound with manual trans

    How did you measure your bearing i.d. ? Did you take it off the shaft ??
  18. gkent

    Knocking sound with manual trans

    Time to start talking "inches" and send Brewers an mail !!
  19. gkent

    Knocking sound with manual trans

    The best way to determine your bearing will be to look at the billet retainers on Brewers site. You likely need a 308 - chances are slim you need the 307
  20. gkent

    Knocking sound with manual trans

    Does that front bearing have a groove for a snapring ??
Back
Top