• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. R

    727 rebuild at home

    Good list here, but You don't need any slide hammers. Thread a 3/8" bolt into the front pump holes @9 and 3 o'clock positions they are threaded, pry out pump body with a hook type prybar. A little bit each side and it's out in 5-6 prys. Bushing drivers a must, always put in front pump and...
  2. R

    Stickers / Tags / Decals / Paint Questions

    You have a 70 RR? The interior decal is a standing bird on the passenger door upper metal part. No bird on the dash.
  3. R

    How accurate are your old rally cluster gauges?

    Completely mormal, worry about something else.
  4. R

    Tire size

    How wide are the front wheels and what offset? Is the front of your car lowered? I have 255/60-15 all 4 on a 70 Plymouth, fit fine on stock 15x7 rallies. No rubbing ever.
  5. R

    Relay for ignition.

    At the resistor the side with blue and brown needs to go to the coil so when key is in crank it will have power. The single blue wire provides power with key in run position. So you need to connect the two together for car to start and run.
  6. R

    2bbl car off base ??

    Does this carb have the base held on by screws? This will happen, the gasket shrinks and now it's loose. Try taking it off, flip it over and snug up the screws. Usually works.
  7. R

    Windshield DIY or Professional?

    It's easy to do with a helper. Inside moldings shouldn't bother it, but may be better in case the butyl tape ones out.
  8. R

    What was this part?

    Center dash piece for no AC vents. Seam is where I added red lines. This piece is plastic. The dash switch panel is pot metal. Same shape
  9. R

    Turn Signal Switch Grease?

    I would not take apart an NOS switch. Does it move smooth right now? I have one that was all gritty from sitting out in the desert. Barely moved. Cleaned it out and lubed it up, works good again. Lubed the pivot points not the contacts.
  10. R

    What was this part?

    It fits the 1968 standard dash only. This is only 1/3rd of it.
  11. R

    HP stamping

    This is your opinion. HP stamp is worth no more to you. How can you say that for others?
  12. R

    Best way to remove 4 speed trans

    I have not had to remove the shifter mounting plate. Let the oil pan rest on the drag link and it will be pointing down enough for that shifter mount to clear the floor. Be careful going back in, don't pull the trans in with bolts, you can break the bellhousing. I just saw a post that an iron...
  13. R

    70 Rocker Moulding Clips Ford?

    70 Sport Satellite has narrow rocker molding standard on all cars. 70 GTX and road runner has wide rocker trim as an option and bare is standard. So they don't use the same clips. I have a friend with a 70 Sport Satellite and he has not yet found any rocker trim clips that will work. Would...
  14. R

    Oil Pump Prime Procedure

    The slot is in the drive gear, it is engaged with the camshaft. You won't spin anything with that slot. Take the drive gear out, and the bottom end is a 5/16" Thats what drives the oil pump. The priming tool is 18 inches long.
  15. R

    Oil Pump Prime Procedure

    It's a 5/16" hex drive. I made one from a piece of round rod and a grinder. Put thee flats on drill end for Chuck to grab without slipping. Loaned mine out and it was still out. I'm going to make them and hand out for Christmas, along with battery terminal wire brush tools.
  16. R

    67 Coronet roof line molding

    Can't be done, separated area above the wheelhouse. I looked into it on a parts car that was just a shell. I was on a Plymouth. A dodge might be different, since the quarter panels are.
  17. R

    67 Coronet roof line molding

    Yes bolted on with 2 studs and nuts. Now for the bad news, must lift up the headliner and remove the headliner teeth at the rear of this to remove the nut. So all the back seat area trim needs to come off first. Back seat, rear door panels, and that wide metal panel above the rear door...
  18. R

    heater control knobs - 1967 Plymouth GTX

    It's a picture on their eBay sale ad for the knobs. That's all l I know for certain. The bezels with the black line, aren't they for 1966 model year bezels only?
  19. R

    Heater box A/C car removal

    There are many fail points inside there besides the heater core. Did you know there are two 5/8" heater hoses inside your box? Along with a water valve and two o-rings on the inlet pipes where they bolt to the box. It's not much fun but try to diagnose it in the car and see what's leaking...
  20. R

    WTB Wanted, 1966 H or 1967 J code Hemi roller project

    Anybody who has one for sale knows what H and J code means. No confusion.
Back
Top