Search results for query: *

I use these wheels for cleaning up metal with minor surface rust, heavier rust obviously requires bead or sand blasting. Tip for saving money - Lowes sells a single wheel for $8 and change but a double wheel is only $10 and change and if I need to get into a tighter area I can take the double...

Passenger side all fit and welded up.

Been a busy few weeks - we got a permanent foster kid placement the beginning of the month, two kids birthdays, getting the old camper set up at the campground for the next month and course my Carlisle trip but back at it today. The rear end was a nice break from bodywork but I need to get that...

Correct, I guess I should have added that info. The year code is the first year that formula was used and in the case of B5 they kept the same color code but changed the formula slightly hence the different year codes. Thanks for clarifying.

Yes, it is a metallic, good catch!

Hemi Orange/Tor-Red is a darker orange, NOT red.

and yes, your best bet is to have it scanned and the computer picks the whatever formula is the best match whether it`s the correct factory one or a 1986 Yugo color.

V2 is technically the code, the E or other letter is the designation for the first year it was used. Hemi Orange is the same as Tor-Red, Vitamin C is the same as Go-Mango.

Code should be the same for both, what brand paint is it and what is the code they are using? -That will tell you if it`s the correct one although formulas have changed due to different type paints mixed with different toners.

:rofl:Thinking the weather predictions are accurate 5-6 days in advance. :rofl: I`ve been there in torential downpours and 104 degree heat so chances are it will be better than that but I`m going whatever the weather.

Maybe thier engines but they have numerous recalls and serious defects like every other manufacturer. "Toyota has had several frame-related issues, including recalls and warranty extensions, primarily affecting Tacoma, Tundra, and Sequoia models from specific model years. These issues often...

I`ve owned TWO foreign cars in my life, a POS Honda I got cheap and flipped it as soon as I bought it and a BMW I got from a relative to fix and sell for a profit. American vehicles may not be the best but I don`t care - MOPAR OR NO CAR for me. My wife unfortunately bought a Subaru after three...

Nothing "wrong" with them, I used in them my `69 Barracuda street/strip build but for street cars that see aggressive cornering I prefer the factory tapered style.

I used a cutoff wheel, chisel and hammer to cut the old ones off and cleaned up the bearing surfaces with a stone and 400 grit paper myself but decided not to risk damaging my $200+ Timken bearings and had the local machine shop press them on along with one missing wheel stud for $60.

I either didn`t get it or deleted it by mistake when I cleaned out my inbox.

How much and where are you located or will you be at Carlisle? And your inbox is full.

In box is cleared out now.

Need a factory driveshaft for my `70 road runner 383, 727, 8 3/4 - 51 1/2" long with 7290 u-joints. I am heading to Carlisle so anyone there or along the way from New Hampshire going I84 to I81.

The FSM instructs you to use a chisel to remove the old ones.

My concern is the wall thickness of the pipe does not spread the load enough along with sharp blows instead of steady pressure might distort the bearing.