• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. dan juhasz

    Best sealant for camshaft core plug ??

    I had to take apart work that was recently finished because the camshaft core plug started to leak. Looks like the machine shop used silicone . They also just made the plug flush with the machined surface , pretty sure by leaving it like that you miss installing the widest part of the plug...
  2. dan juhasz

    Motor mount discussion

    Went to install the engine and trans back into the 67 GTX. I had to replace the nest impossible to find drivers side mount for the Hemi 2864184. I bought it from one of the popular vendors, not sure which I’ve been collecting the parts for better than one year. When I went to lower the engine on...
  3. dan juhasz

    Cometic head gaskets

    Are cometic head gaskets for a 426 ( 5 layer )installed as is ? No spray sealers or silicone in any common leak areas?
  4. dan juhasz

    8 3/4 sure grip ring gear bolts

    I ordered a set of arp 240-3001 3/8-24 LHT ring gear bolts. I believe it’s a 67 center section. The some shank directly under the bolt head is larger in diameter than the holes in the sure grip half. I see no other bolt in arp catalog. Does any manufacturer make the correct bolt?
  5. dan juhasz

    suggestions for diagnosing a driveline shudder?

    I have a stock unmodified (has a 3:91 gear set) 67 hemi gtx 727 8 3/4 combination. Was out for an end of season cruise yesterday that included mostly highway speed driving. I generally stay between 55 and 60 because of the gears. Under part throttle at those speeds it is smooth as glass. If I...
  6. dan juhasz

    9 keyway billet timing set

    So I purchased a billet single bolt 9 keyway timing set for my 440. I wanted a quality billet set but didn’t want or need the nine crank slots. Just run the cam straight up. Purchased from 440 Source but turns out it’s a Summit private label part. So first thing I notice is the marks are not...
  7. dan juhasz

    426 head gaskets

    I've got to choose head gaskets for my 426 hemi rebuild. I know many people love cometic mls gaskets. They are on the short list. When it comes to composition gaskets the Best Gasket Co offers a graphite head gasket with flattened steel ring ( has anyone ever used gaskets from this company...
  8. dan juhasz

    426 Hemi pedestal question

    I noticed the end pedestal on each set of rocker assemblies the locating pin hole is oval and not round. Is this normal or do these 2 need to be replaced?
  9. dan juhasz

    426 Hemi engine questions

    I had started another thread on weak performance on this 426 Hemi. Started the tear down and have several questions . So I want to detail and re paint the engine compartment regardless, so engine is out. This engine has not run in several weeks. There was all this liquid on every closed intake...
  10. dan juhasz

    Hemi Cam suggestions

    So I've started dealing with some mechanical issues in my 67 GTX . I already pulled the 833 and rebuilt it. But I've never been satisfied with the performance of the hemi, always felt like it had a slight misfire and generally feels lacking. Even though it does have even cranking compression...
  11. dan juhasz

    ID a purple cam!

    Is it possible to ID a Mopar purple cam from these numbers stamped on the rear?
  12. dan juhasz

    Tool for tailshaft bushing removal 833

    Isn't there a tool made to pull the tailshaft bushing from an 833 4spd without removing the housing? looking online and checked Brewers I'm not finding what I'm looking for.
  13. dan juhasz

    440 freeze plug question

    Customer of mine had a rotted core plug in his 440. He gave me shallow brass 1 5/8 plugs. Had a little bit of an issue getting it in (headers) but I thought it was good. Came out the next day and had some coolant in the drip tray. Barely leaks but it leaks. Removed it , when out and bought a...
  14. dan juhasz

    Power Lock brand sure grip

    I’ve got a noisy differential, grumbling unhappy, not a whine. It has a relatively new power lock branded clutch type sure grip. Pulled out the pig tonight and see nothing obvious wrong. The cross shaft have the angled machined surfaces that fit into the V of the housing. If you look carefully...
  15. dan juhasz

    Hybrid u joint question

    I’ve searched for a part number for a hybrid u joint that I could look for locally and not have to order one. Is there a joint made that would be 1350 driveshaft and 7290 on the 8 3/4 pinion yoke. If any one knows a part number would be a big help. If it’s even made. Dan
  16. dan juhasz

    Oil pressure, how much is too much

    So I just finished installing a mechanical water temp and oil pressure gauge. In a 67 street Hemi, stock trim. I was surprised that on a cold start high idle (1500 rpm) it reads 90 psi. Once warm choke off 700 rpm it drops to 40 psi. Off idle driving 75/80 psi . I wasn’t expecting these numbers...
  17. dan juhasz

    any tricks to remove stuck pipe plug?

    want to install a mechanical coolant temp gauge but the pipe plug in the timing cover on the 426 won't budge. anyone have any tips besides a burning all the paint off with a torch to free this puppy up? pretty sure its oe so I don't think I could weld a nut to the top of it, if its oe its not...
  18. dan juhasz

    Torque converter balance question

    Customer of mine has a 65 Satellite. Current engine is a 73 (?) 440 with the original 65 727 cable shift trans. I will be installing a 69 727 trans. On his current set up the converter has a balance weight. The 69 trans that is going in has no balance weight, besides buying a new converter for...
  19. dan juhasz

    wheel stud help

    i've been going through countless dorman info pages looking for wheel studs for the factory disc brake rotors on a 67 gtx, has anyone crossed this bridge and have a part number that is suitable?
  20. dan juhasz

    Cometic VC Gaskets 426

    Do cometic valve cover gaskets seal on factory valve covers for gen 2 426 hemis? See them on eBay for 31 dollars each thought about trying them.
Back
Top