Search results for query: *

I found my wiper arms. They never had blades on them. They are Anco made in the USA. Were these the originals? Also what type/size of wipers do I need for these? They look like some type of press fit since there are no holes or barbs etc on the end.

So I am trying to figure out the correct color orientation of the red white and blue monikers on say the 1970 GTX and Sport Satellite. This would include the grill emblem and the ones on the interior of the doors. I looked at a bunch of what I thought were original cars but found a mixed bunch...

Anybody got some tricks up their sleeves to help me figure out how to get access to the connectors at the back of my outside headlights without removing the front grill? My front grill is really fragile and I don’t wanna take it off if I don’t absolutely have to. What I’m trying to do is...

While searching for headliner trim clips (never found them so posted in WTB section) I came across this spring in my pulled parts box. Looks like something from the hood latch? I have no idea. It’s 2-1/4” tall. Can anyone identify? Thanks, Ron

Hey guys I need to replace my Pitman Arm washer. I measured 7/8. Can anyone tell me how to get one from either Oriley’s or Autozone locally? Can’t find one based on model yada. Descriptions don’t give size. Just wondering if anyone recently purchased one of these. Are these a simple lock...

What type of seam sealer dries hard and is paintable? Do all urethane sealers dry hard? I don’t want the stuff that stays gooey.

So I seem to be missing my hardware bag that connects my front transmission rod to the steering column. The steering column flange hole is much larger than the pined rod. So there must be some bushing that I am missing. Can anyone help me identify what parts I am missing to join the rid to the...

Looking to install my vent tubes. I see where the longer tube goes through the trunk as seen by the pic. I just don’t recall where the short tube comes through. Any pictures would help! Thanks!

Hey guys I can’t seem to find the posts showing how you welded the adjuster onto the support. Can you guys point me to that info? Should I drill out the two adjuster holes and spot weld it into place? Any tips on this is appreciated. Oh also the fsm does not show the details on how this is set...

So originally I thought a Belvedere was a room with a nice view. Then I thought it was a mediocre vodka. Then it was some bland Plymouth brand of cars. Then I realized I have one. So what the hell is a Belvedere anyway?

Reposting here for more traction. My steering column appears to be about 1/2” too short. What are my options? Pictures show that in the correct position to line up the column bolts and support screws it’s off (short) about 1/2 inch. Also the shifter is just about touching the dash. This is...

I noticed a perfect rectangle clean area on the outside of the two mounting studs of the accelerator pedal. This implies there was a backing plate there before the factory undercoating. I don’t recall taking it off but there was non factory carpet installed sometime ago. I looked at the FSM but...

I assume the accelerator plate was mounted under the carpet but want to confirm. Any pics on how it was done by the factory would be helpful. Thanks MF

From the assembly manual I am trying to understand how these plastic breakaway supports offer any safety. Can someone please explain? I can’t visualize the break and subsequent benefit in the FSM drawing. I know I am missing something. Is the column supposed to just drop in a collision?

My car never had the mast but had the original base as pictured. How does/did the mast get inserted in the holder? Is there threads deeper in there or is it just a press fit or am I missing another part?

Guys looking through my docs but I can’t find what this hole in the firewall is for. From my engine bay picture there is a bolt in there and also another just like 7 inches away laterally.

Anyone know off hand what the size thread the seat belt attachment bolt is? I believe its a 7/16 and I’ve tried a few bolts but non fit because they have been painted. So I need to chase them out but need to know the thread size less I pull boner

I would like to know if my air cleaner will clear my new AMD GTX/Roadrunner fresh air hood. I am not able to test fit the hood right now as I am working alone and don’t have anyone that could lend me a hand. I was wondering how my drop base air cleaner sits as compared to your air cleaner in...

Anyone know the difference between these two manufacturers fiberglass wings? I am curious as to the quality and strength comparatively. I know not many here will have experience with this but any input would greatly be appreciated! MF

Has anyone successfully repaired a pot metal stud such as on a body tag? I am looking for a robust way to do this and was thinking of doing this way if nobody knows a better way. Take a thin copper wire and wrap it around the broken pot metal stud to the desired length. Then using a micro torch...