Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I used this one. It fit without grinding anything or changing the terminals (1968 383 RR 4-spd). On the barcode is 17466N.
I didn't realize there is a dust cover that goes behind the mini starter, so now there is a little hole into the bell housing that the old starter covered. I'm going to...
Thanks. I might try the 2005-2008 Dodge Ram 5.7 MANUAL transmission starter. I just put on a reman old whiney 3258 and it's iffy (sometimes click no turn). I like the old stuff, but I can't be sitting there clicking either. Haven't decided what to do yet.
I have 3 Edelbrocks, and they all want to idle a little higher than where they are set after driving around for a while, no matter what. I don't use the choke and have it wired open, 4 speed so no extra automatic stuff, no vacuum advance. I think that's just how they are.
I just took a 3257 off my 68 RR. I bought from Chief Auto Parts 34 years ago, so it served me well. There were hammer marks on the cover, but I never hammered it. Whoever had that core before me did.
I replaced it with a reman 3258, which so far works most of the time. lol
3257 = 1.1 kw...
I just use the traditional lazy-lobe factory pattern cam and valve train. I installed the cam in a parking lot around 1990, and it lives to this day.
I didn't know anything then and still don't. I just assumed the people that designed this stuff knew what they were doing and copied them.
I switch off between Edelbrock 1405 (straight booster) and 1905 (**** booster).
The 1905 is smoother right at tip-in, and other than that, not a dramatic difference between them. I like both. Have used the 1405 since forever, and got the 1905 out of curiosity.
I wanted Bassett or Aero wheels at one time, but I still have LH threads. Could not find 45 degree LH lug nuts, so I used Cragar steel wheels. They are heavy but served me well.
It's 10 degrees F here in Jesus Land. We think that's cold and the wind always adds to it. I drove my beat up old Road Runner. It has an Eddie 1405 with the choke wired open, but it still has iron heads with crossover for heated intake manifold. It was a little temperamental at first, but did...