• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Before: Jul 22, 2025
  • Order by date
  1. hunt2elk

    SOLD Torque Flight Adjustment Tool

    Sold, thanks FBBO.
  2. themechanic

    Help me identify these B/RB Pulleys

    I learned from other threads on FBBO that spacers are available.
  3. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    Soo.. tonight i put resonators after the axle to try to get rid of the raspyness and quiet it a bit more.. it did help a bit.. not as much as i had hoped. I only got the 3.5" ones since i was worried bout space, i should have gone 4" and might over winter. I am wondering if some turn downs at...
  4. icetech

    62 Belvedere 318 poly granny cruiser (one day i hope)

    yes... sadly.. it was just too far gone :( really wanted to keep the whole car bone stock but it became a mess. nothing i can't change back though. The current motor is a 318/trickflows and a howards roller... i have a 360 block at the machinist, might be done before winter...
  5. eldubb440

    Prototype Plymouth Superbird Recently Found!!!!

    that looks way better than the 70s IMO
  6. Triplegreen500

    The Meme not a Meme Thread Part DEUX

    Drop the coke habit, your metabolism comes to a screeching halt.
  7. Triplegreen500

    What did you do to your Mopar today?

    Well .. NOW I'll take care of my back. Reassembly Thursday. Have a concert to do tomorrow. Man, I hope my back chills out in time...
  8. Unkle Krusty

    How airtight were b-bodies when new?

    Drive anything a few miles on a gravel road, and see how much dust is inside. We went about 1200 miles on gravel, so got a lot of dust. We leak more now than when new, but I bet the Tukvan leaked from day one. Also there is the hardened and congealed dust under the floor and in the running gear...
  9. C

    Help me identify these B/RB Pulleys

    I put in a new power steering pump and the pulleys are off about an 1/8', can I just add a spacer to the balancer pulley?
  10. padam

    The Prince of Darkness won't be down for breakfast

    “You mean you’re holding me to that deal?”
  11. J

    Something happened after leaving a car show.

    I like playing my best, I best like just playing. Life is serious enough, golf should be fun, if not, I don't play.
  12. Griff

    Best way to remove 4 speed trans

    Thanks for those tips as well
  13. Griff

    Best way to remove 4 speed trans

    Yes
  14. 6

    65 Coronet 2 Door Sedan Headliner Bows

    Thanks everybody, Looks like I can install my my headliner.
  15. M

    '69 B Body 383 - I would like to add a fan shroud. Will this work?

    Hi all, '69 Super Bee with a 22" radiator, no AC. I'd like to add a fan shroud then, later, a fan clutch setup. I was looking at the below shroud but they're saying it will work for 440 only. However, the hole to hole measurements they provide are the same as I have, my fan is just under...
  16. Kern Dog

    The Meme not a Meme Thread Part DEUX

    Most of us change a lot over the years. Axl Rose sure did. He was waaaay thin when the band came on the scene. The way he looks today, it was as if he had been paid for his concerts with an American Express Gold McDonald’s credit card.
  17. Nutso

    The Meme not a Meme Thread Part DEUX

    Axl rose?
  18. Don Frelier

    How airtight were b-bodies when new?

    If it's a Mopar then it's gonna leak. ( It will run great though)
  19. themechanic

    Help me identify these B/RB Pulleys

    I purchased all the pulleys I need from Bouchillon Performance.
Back
Top