Search results for query: *

It maybe too early to claim it's fixed, but after two short drives over two weekends I do not see any leaks. I poured exactly one ounce into the power steering reservoir as I've read one ounce per quart of fluid. The stuff smells of Isopropanol which I use quite often at work to clean circuit...

C body switch will work. See other in this thread.

I believe A to B is the large spike you captured on the scope.

If you look at this paper you should be able to capture what is described on page one: Point A: is the instant at which the contact points open thus causing the magnetic field to collapse through the coil’s primary winding. A very high voltage is thus generated in the secondary winding and this...

Can you continue to keep the trigger and change the timebase to zoom in on this section of the waveform? That is probably the coil charge portion?

I can't visualize a fix for your issue. I can tell you that I always throw in the towel when I have issues with the bell cranks. This is the solution that works. Expensive and worth every penny. BPE TorqueFlite Kickdown Cable Kit - Bouchillon Performance Engineering BPE TorqueFlite Kickdown...

Before you order find out what power steering pump you have (assume you have power steering). I believe if you have a Federal pump you must change it to a Saginaw and buy an additional adapter. Post in thread 'Anyone install Vintage Air in a 1967 Coronet?' Anyone install Vintage Air in a 1967...

Vintage Air is a great system. I was very pleased with the finished results. I'll buy vintage air again if my next B Body needs it. I'll post my thread below, but @Kern Dog did an excellent step by step install thread. Search around for that thread it's really informative. Anyone install...

Great news. Thanks.

If you have a motor lift (cherry picker) and three helpers a wildfire goes together easily with a few hours.

Wildfire has a installation service. When it was quoted to me it was $850 plus time and travel.

You are correct. Each vertical division is 100V per your scale. The "Vp-p" is volts peak to peak. A us is microsecond which is 1*10e-6 seconds. I'm impressed you picked this up easily.

This makes your scope useful ignition_waveforms.pdf https://share.google/i21Vl9BDLdopCYaPJ

Looks good to me. You have it triggered and capturing a waveform that's 728v p-p. You can change the time base and zoom in on the ringing. Somewhere I have a link to a white paper that explains how to use a oscilloscope as a ignition system analyzer. You use clothespins, foil tape, and 0.01uf...

Interesting Hagerty article HBO Max's Duster Is a Gift to '70s Gearheads - Hagerty Media

Didn't last long. Kind of sad. Why Josh Holloway's Duster Was Canceled By HBO Max - SlashFilm

@Slantsixdan switch was made by the original Chrysler supplier. I believe it was made in Argentina.

Shows out of stock. I wonder if they will get new stock?

Search around on this forum. People are buying a NOS Mopar turn signal switch for a C Body. The difference is two additional wires for cornering lamps that you just simply don't use. Perhaps @threewood can comment here. @Slantsixdan used to sell great turn signal switch replacements, but I...

Just sold for six grand.