Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I thought it was the float level, but after an adjustment it still weeps. Not all at once but after a few days this is what I see. I think the seat is shot. Any ideas?
440 six pack starts right up, idles great but has been stalling on hard braking. Im guessing float height or vacuum loss from power booster. What do you guys think? Mild motor .528 cam, 4 speed, 3:54 around 500HP.
I have an AVS that the mixture screw was frozen and I snapped it. Drilled a pilot hole, tried heat and an extractor, no luck. The housing is OK not screwed up yet. What would you say to sending a mig wire in the hole and create a new head??
Developed a leak at the lower gasket on the pump. I took it apart to clean out the old gas. Its been sitting 1 year with only about 1 hour of use on the pump. When I removed the lower portion I found a black square hard sponge. Ive never seen this. Could this have caused a problem with the check...