Search results for query: *

Now? Crapshoot. FBO has one that is made mostly with components made in USA. Good one but not cheap. The HiRev 7500 was a decent one from my testing. Think they stopped making them. Find the older pre 1995 stuff if you can. I really like the Petronix 510 set up just like MSD, but reliable...

Doing what I do I really have to be carefull of the parts I get in. Way to many fake Mopar stuff out there. Think the worst scam is the newer Mopar Electronic kits. Made by proform, but authorized as direct connection. Really crap and have a super fast curve on most of them.

There is a ton of it out there now. https://www.forabodiesonly.com/mopar/ams/how-to-tell-nos-parts-from-nors-at-a-fast-look.399/

What post louder!

I think there was one at Chrysler Carlisle this year we heard it and thought it was a tornado warning!:lol:

That ohm ballast is Race only. It will fry the ecu which is a knockoff if you did not know hence the word "replaces" on the label. Common. Prob Mopar Authorized which means they bought the right to slap Mopar on it! Coil is high also.

Bump

Bump

Bump

Bump

a 15 factory slot will only give you 30 crank degrees maximum, the plate will not add to that just limit it.

Only one I am aware of that needs a adapter is MSD.

Hate to say this sounds like it died.

OK the coil should have a primary resistance of 1.5 ohms for a mopar standard ecu. Not a big fan of the new Mancini boxes they are Chinese knockoffs painted orange and have a fake transistor. They have a pretty good fail rate also...

I am sure there are more.

A petronix 510 nos set. Compare it with MSD just about the same with almost no fails that I have heard of. Asking $275 and the ride.

For Mopar and most other brands of the 70's. Asking $150 and the ride have three of them all tested.

I have electronic and also points troubleshooting books. $25 each take both for $40 and the ride.

I have had some distributor advance springs made up that wont fully advance in low RPM like the MP or Mr. G springs do. for use in point and electronic distributors 59-77. Very similar to the blue dot springs I had but better performance. They fit Dual point, single point and Mopar electronic...

I have some slant six HEI mounting plates made by the Fabulous Ritchies Garage. Asking $40 each to offset Machining costs. I also have NOS HEI modules with a proper plug to attach to a gm 4 pin. Also have all the components needed to make this up Mounting plate with screws, and heat transfer...