Search results for query: *

I use CL only FB is like DectiveD states is trash.

Timing set worn out? Is possible that your distributor weights are in backwards thus retarding timing? I dont know if that actually works like that but, its the second thing that pops in my head.

Because the 8 3/4 is a kind of semi floating axle. The 9 1/4 is C-clip axle similar to GM. I have not had a look at a Dana 60 out of Chrysler car, but I believe they are similar to the 8 3/4 as far as axle retention?

Armadillos must die!

Carry on.

You would think wrong then.

I know 66 doesn’t have ptk but it does have full throttle kickdown. I dont wish for the transmission to drop to 2nd until it reaches full throttle. Its bad enough it drops out of OD. Its very bothersome that it drops out OD. And sometimes it drops to 2nd. If I have 230Hp and 330ft lbs I expect...

Mix A single stage blue without the metallic should be pretty nice. And affordable.

I wouldn’t call green bearing an upgrade. But all the bearings and seals are available for my 8 3/4 on rock auto.

I probably wouldn’t do it. If You send it somewhere get a guaranteed completion date or you may never drive it again. If your planning a DIY restoration I hope you have a lot of time and motivation or you may end up in the same spot. If it looks decent I recommend a roadstoration. Fix any know...

Beware if you put slime or any of those type of products in your tires, the real fix at the tire shop may not hold. Case in point wife had a flat while I was away working. She didn’t want to bother me and put slime in it and aired it up. Well it kept going down. It ended up in the tire shop and...

Thats a nice herd you got there. Only IH id add would 806 or 856.

Yah good luck. Streaming subs are by far worse than satellite. You need to have 10 of them to get the channels you want, may as well get satellite. I personally have none. I can get by with very little tv.

Hook up the vacuum advance. Lean mixture needs more time to burn.

Must be nice. I bet we barely break into the high 70’s by morning.

A HP long block would have a windage tray and cam and lifters that you may be able to reuse but nothing else of value. Big exhaust valves and springs are most likely shot. As for the HP block only, no difference in value. If a non-matching numbers block only . Needs an HP stamping on it to...

830 hp what kind a f equipment did they build to pull behind it. There certainly wasn’t anything commercially build that big.

I can see that floor jack sweating from here. I bet it said uff da when you put the frontend back on!

That resembles horse ****!

Yah I often thought that is a major problem many of the places Ive ventured to. Piles of brake dust at every intersection!