Search results for query: *

I get ya'. In that case, painting the block was a good call.

...again, doesn't look to be black with a white tracer, certainly not a 12 ga wire. Looks more like gray with black trace, 18 ga or smaller. If so, that would likely make it the tach signal wire (T11 20GY*). Where does it go to, if it’s the tach wire it should route to a gromet in the firewall...

I have not greased either yet I'm trying to determine play. It just feels loose - moves easily vs the other. Just collecting opinions.

Not today, but Sunday.... Rebuilt and ran wire into all the passages on the Edelbrock 1407 in my Belvedere. Car was running rough and I suspect some passages were plugged. Wasn't the first time. Took about 20 minutes and she was tip top after.

I would love to have a Smokey and The Bandit Trans Am. With all the gold pinstriping. Easy enough to make it fast. Remember we have the '81 Camaro BumbleBee replica. It gets so many positive comments, I think because everybody knows what a Camaro is. It's a real POS but so was the movie car...

He's looking for the quarter panel extensions. Thanks for the clarity

Did you grease the the stiff one? Is there play in loose one, can you feel if it's loose?

Draining power somewhere.. seems they could find that. i had to put rear pads in my cherokee at 29k.. fronts are fine..

They all look worse the deeper you get. Welcome aboard !

I will take it. Sending pm

Thank you. Those black ones would work well on another Mopar I have with a black engine bay. And get me by until I can get the white straps for my white engine bay, 66 Charger.

I was able to have a look at the heater/AC control unit tonight and I do see a black/white strip connected. So, that black/white remains a mystery!

I have a Dakota Digital cluster module and a TCM430 trans controller to hide somewhere. I am not using the factory radio, I have a single din unit in its place. That freed up some room. The contollers need to be accessible so this is what did. They unfold and come down.

Yup. Brand new one. The large O-ring under the cover was pressed flat with no rebound. Same with this one and the other small one inside. I pulled the oil sending unit this afternoon and it looks like oil has not been up that far. But it has been sitting for two weeks. I expected to see...

I'm curious what others will have to say, but my rule is if they're installed, they're good if there's no in/out movement. But if the part is in my hand and I can spin the joint easily with my fingers, I'll reject it. The one you have that's stiff will probably be just like the other one after a...

Still have the noise. I was told to drive it and hopefully, it’ll get better. I’ll live with it through this season & if it persists, I’ll get serious about it over the winter.

Coworkers brother-in-law is a sales manager for Nissan. He bought a truck(not full size), 4xpro or something, said it was 52K with a discount! He carries a jumper box because it won't start in the winter sometimes. They can't figure it out. His wife's Rouge, no issues except 20k for breaks and...

Do NOT buy a Rogue. They are chock full of stupid crap. A/T shifter that was not intuitive to operate. The lack of knobs for the HVAC system is crap. A car that automatically UNlocks as you approach it is stupid. What if some attacker were hiding and wanted to JACK the car? Now he has a way in...