Search results for query: *

Eyeballing it, looks to point right toward where someone's lap would be in the car, and the outward trajectory puts it right through the rectangular opening where the brake line would pass through. For a separate antenna, or stock? Mine has the stock antenna cable routed the regular way...

So to summarize so far: I took off fan and fan clutch, removed my exhaust and starter (since bell housing g will be coming off.). I used a friends Harbor Freight scissors jack with a board on top. Ratchet strapped trans to jack, and the took out cross member and trans to bell housing bolts I...

Surely, someone around Springfield on Facebook Marketplace has some cheap tires and rims. Go get some tires/spares off of a 1992-2011 Crown Victoria, or any other 5 on 4.5" auto. No way I would spend $400 on trailer tires. Hell, for that matter borrow the tires off of a friends car trailer...

I have a pair of trunk gutters from a 65 Coronet. I did some repairs in the front area of these pieces. Overall nice usable parts. I believe these are one year only items. $75.00 each plus shipping from El Dorado Hills, Ca. PM me if interested.

I'm needing to haul a 72 Plymouth b body from a field in the middle of nowhere and the tires are shot. I'm not finding a cheap set of wheels and tires that I could bolt on to allow me to load it on a trailer.. Would a set of trailer wheels and tires 205/75D15 5x4.5 work? It's about $100...

I think Richard works with this company. This is place where my friend bought his. https://www.quireyqualitydesign.com/

Been around them a long time, never seen one separate like that on the engine. It's a first for me.:thankyou:

Thank you for the help, just took out trans, like you suggested. I’ll be removing and modifying shifter bracket as well after a get it off this weekend.

:rofl:

You must of not worked on two many cars with carburetors. Very common on just about any carb that the base is screwed to the bowl.

Looks like you wedged a screwdriver in there. It possible that doing that ruined the gasket. Try r and r on the carb and tighten the screws. Costs nothing to try.

I'll pop it off tomorrow. Wouldn't think they could loosen, unless they're above the intake. Should probably rebuild it anyway, been on there a long time.

Welcome from Connecticut.

Maybe it had a dealer installed AC unit originally?? They were very common....just a console hanging under the center of dash.

Take the carb off and flip it over you will see the screws. Not uncommon to happen. Most of the time just tightening the screws will fix it.

Time to pull it off the car and get a proper look at it. Probably not a good idea to "just tighten the screws" even if you could get away with that.

Thank you for the help as well. Yes, I took off fan and clutch, not running a shroud. Motor is just touching drag link and I have a jack and wood blocks just rear of drag link supporting pan/engine as well.

welcome to FBBO good luck with your search

There should be screws below.

Just touching base with all of you. Thank you for the kind advice. Aluminum pad was not removed and came out like butter. Putting it in might be a different story. So I’ll probably remove it before I put it back in being that I stripped 2 of the Allen bolts anyways.