Search results for query: *

My 69 Roadrunner

Only bleeding required is at the hydraulic throw out bearing.

No I didn’t have to remove the engine. I changed my Roadrunner from an auto to manual. I removed the driver seat so it was easier to get under the dash. I ran the hose from the under dash unit through the factory clutch push rod hole and had to drill a hole in the firewall for the reservoir...

The previous owners wife was a good seamstress and she used a Roadrunner/Coyote bed sheet and quilted it to lay on top of the car when having the hood off at cruise ins and shows.

My car is a clone/tribute. A12. I use this for the hood when doing maintenance etc in the garage https://www.harborfreight.com/200-lb-capacity-portable-work-stand-38778.html

Reduced $175.00 shipped.

Previous owner of my car (tribute/clone) found a bed sheet for a kids bed with the RR cartoon on it. His wife made it into a quilt that I put on top of my car to protect the paint when placing the hood there for car shows.

The drum side of your master cylinder may have a residual valve this is to keep line pressure against the wheel cylinder cups.so that you don’t have to initially pump the brakes. Is there anyway have the lines reversed coming from your master cylinder with the drum side plumbed to your calipers...

Hurst 5384078 shift lever fits 66-70 Non Console B body. Hurst 163003 Shift Ball and matching Brewers floor boot. SB074. The chrome bezel for the boot is not included and is sold separately by Brewers. The parts are about 5 months old and have been driven less than 200 miles they are in as...

I had the 71 Up (Pistol Grip) shorter style in my car to begin with not the longer 1970 style Pistol Grip This (4078) is what’s currently in the car and the length with the upward bend for the ball mount it feels like a truck. Thanks.

Thanks. Thats what I wanting to know if someone might have a part # and or a pic of something they are partial to.

I’m currently using the Hurst 4078 shift lever in my 69 bucket seat non console Roadrunner. This is what Hurst catalogs for nearly all B bodies. I don’t particularly like it and would like to replace it with a shorter handle. I initially tried a 71+ B body pistol grip and it hit the dash in...

I recently converted my factory floor shift auto 69 Roadrunner to 4Spd. Built the transmission myself and used a Malwood hydraulic pedal kit. It improved the Fun to Drive feeling 100%

I also used the Malwood kit with a Ram hydraulic bearing in my 69 RR. Works great! I have the American Powertrain set up in my 72 Duster and hate it. Pedal throw is extremely short due to having to use a pedal stop and pedal effort is heavy with using the original mechanical linkage hole on...

Auto Floor console removed from my 69 B body due to a 4 speed conversion. I will include the floor shifter and what linkage parts that I have to include transmission kick down rods. I don’t have the floor brackets or guarantee that there is every piece needed to convert to a floor shift but will...

New reproduction pistol grip as used in 1971-74 B-body . 14.25" overall length, 7" layback. Also works well in A bodies. Would NOT work with my 69 B body as it hits the dash $300 Free Shipping US 48. PayPal or USPS MO