Search results for query: *

You probably should have opened up the pump and verified that the clearances are in spec. That would have also been the perfect opportunity to “prime” the pump with assembly lube. It sucks not knowing the history of the car, it could be just plain worn out or some ham handed mechanic screwed...

I have an irrigation system, but the MILF across the street likes to do yard work in spandex boy shorts and a tank top. Watching her will be better than watching a sprinkler any day of the week…

Spent most of the day helping my replacement put together a work schedule and transferring all my customer contact info to his phone so he doesn’t have to manually enter everything. We’ve been working together for the past few months so the transition should be pretty seamless. Next week I will...

I paid about $150 to powder coat the K Member, it would probably cost more to have it blasted and paint it myself given the price of paint materials these days...

The Gearhead Gathering at Warren’s garage condo complex?

There are YouTube videos that show how to adjust your window mechanisms, they explain it way better than a wall of text possibly can.

Before: you can see where the port is supposed to be located After: with a hole cut to accommodate the pickup. The stock gasket has a much larger center hole.

It was Milodon, I discovered it the hard way a couple years ago. They put the gasket for an external pickup in the standard kit. It was painfully obvious when I took the pump back off. I cut the gasket around the pickup port and reinstalled it and the pump. After spinning the pump a few...

Do you know the bore size of the master cylinder? The smaller the bore, the more travel it requires to displace the same amount of fluid. I think B-Body power disc brake master cylinder bores are around 1" - 1.125". How far is the pedal from the floor to start with? Is the brake booster pushrod...

If you’re running a divorced choke, blocking the crossover could be a problem. With an electric choke or no choke at all, I don’t see a problem. I have no choke and a blocked crossover, cold idle is a little erratic but drivability improves and the idle is fine within a couple blocks.

The Holley throttle adapter will move the stud higher which resin a longer arc of travel, I wouldn’t attempt to make any further adjustments until the adapter is installed.

Send them back and get QA1 arms…

40 C is 104 F 104 F is hot, but in many parts of the world that's just another day...

Working with my replacement, only 12 more working days until I retire. From here on out I’m visiting customers, doing my farewell tour…

That doesn't bother me too much, the extra cranking to prime the carb allows the engine to build oil pressure before it lights...

Too much offset, you need wheels with a bit more backspacing.