Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
you do not want the green type bearings with the end plate welded to the bearing. this type will not let the bearing float in the axle tube when installed.
Try Restoration Specialities call 1-814-467-9842 use part #8420 as your descriptioin and then tell them the length you need. Or you can go to webb site and search. Part # 8420 is too short. You could also use this part by cutting and epoxy two pieces to gether to get the correct length.
This will be harder than you think. once the slots are made you will not have enough room to install the nuts on the rubber mounts and then you will have to figure out how to move the trans mount back.
noisy hissing sound and hard to turn at low idle 750 rpm set the idle up to 1000 and its better, but still noisy. I would like to just take the part with the fittings off so it could be ported properly ( the part that is held on with 4 bolts ) If I could get this part off I would send it to...