Search results for query: *

The hose does not fit between the bracket and the head. Is this the correct PS pump? If not, what one should I have? Thoughts? As always, thanks everyone. :)

Hi all, I am about to drop in the motor on my Roadrunner and want to put in new motor mounts for it. I tried ordering new mounts but they are shorter that the original and the supplier can't find ones that fit. The metal is thinner as well so I though I should try just getting inserts for the...

I know this was on the inner fender on the left but I don't have any pictures showing where it was located. May best guess is it was for covering the wire harness or maybe the brake line... Any help would be much appreciated.

I got this from FCA Historical Services and thought I would share.

I was just looking at the specs and I see that the 73 RR has a length of 210.8" and the 74 has a length of 212.4", a difference of 1.6". Anyone know what made the 74 longer?

I just replaced the rubber isolators on the front crossmember of my 73 RoadRunner, the manual has 2 different torque specs for the bolts. On the diagram is has 50 Ft-Lb and in the step by step instructions it has 80 Ft-Lb. What would be correct?

I am replacing the tank and Fuel Tank Sending Unit on my 73 RR, there are 2 available, with or without the vent return line and I am not sure which I should use. The old one had the vent line but it also had the 4 vent lines on the tank blocked off. Thanks in advance for your help.

Has anyone used the control arms from Classic Performance Products, part number 6374SCA-UK-BE? I see that they come with the bushings installed, my question is how do you install the shaft if the bushings are already in the control arm? Thanks in advance!

I am giving my 73 Roadrunner a much needed front end rebuild. The lower ball joints were press in type but I noticed that there looks like there was threads there before. So, I am wondering, are the ball joints supposed to be screw in type? I looked in a manual and it says that they are screw in...