Search results for query: *

I have a fresh built 440, it has an aluminum water pump and housing with an aluminum Radiator. The cap is a stant 10230 16# it has an engine fan and auxiliary electric fans that come on at 220. It seems like the water sprays out of the rad cap starting around 195 until it hits higher and starts...

I've got a low compression 426 wedge fully rebuilt. It has about 80 psi or more at idle when cold and goes to about 40-50 while driving hot I use 10-w30. Is this a safe average or should I use a bit heavier oil.

I'm trying to start my engine in my charger its a 440 low compression with an msd-like ready to run distributor. it cranked for a while and we had to pull the distributor and turn the gear one over because it was off and then it actually starts. The issue at hand now though is it dies as soon as...

My dad's superbee has an issue where it's not moving in reverse even at higher rpms but if you build pressure in neutral it'll move for a few seconds before needing repeating. It seems to work okay when it's warmed up. It's been sitting for a year with infrequent driving before this.

Bought a seized 440 and trans for 500 cad and took it apart most bolts came out easy but I think I'll be lucky if it cleans up at 30 over.

I'm trying to see if they ever made a piston for my application or if I need something custom or modified. . 30 over 1.094 floating rod Forged At least 10:1 https://www.summitracing.com/parts/esp-6358c3d/ Those are the rods I have to use, I'm in southwestern Ontario so the used market isn't as...

I'm planning a build for a high rpm 383 with a tunnel ram in a car that's less than 3000 pounds. I want to build an 8000 rpm low deck for somewhat cheap. I've got a 66 383, I'm planning to get some aluminum heads from a swap meet and looking at about 4.56 gears with an automatic around 4000...