Search results for query: *

Hey guys, I have got a technical question regarding my 1962 413 engine my enginebuilder is in the process of fixing my 413 engine for my 1963 Savoy, but we don't have a good lead to some quality pistons... Sealed Power are on the heavy side, as well as KB hypereutectic. It won't be a...

hey guys, I hope someone can help: I am looking for interior pics of 1963 Plymouth B-bodies, in light-, medium, and dark blue. Any info/pics are welcome! thanks, Marcel, the netherlands

hey guys, Need your help; I have an original early-b rear axle on my 1963 Savoy; I swapped the original third member ( I believe it was a 741 non-suregrip unit ) with a 489 cone-type suregrip. Right side: axle slides right in, and fits perfectly. Bearinghousing is flush with the axlehousing...

hey guys, As you might know, I am restoring/cloning my 1963 Savoy 2-door SDN to a Max Wedge car. Car is gonna look as original as possible. I would like to have your opinion/recepies on my engine; it's a 1963 413 wedge, will get bored/honed to the 426 bore, and I will install a strokerkit to...

Hey guys, does anyone have a few pictures of doors/hoods/fenders that have factory red oxide primer/primerresidu on them? As far as I know, Chrysler shot these parts in red primer in the factory. My car is going to the painter next week and i want to have the doors/fenders shot in red primer...

hi guys, i have a 1963 Savoy, with the "old" type rear axle; i want to swap the original 741 non-suregrip case for a later type 489 with suregrip; can i use both of the axles or do they need shortening or adapting to the newer 489 casing? thanks!

hi guys, Does anyone know what kind of engine code was written on the valvecover of a 426 Max Wedge engine? ( I have attached a random engine pic from the internet, just as an example ) thanks! Marcel the Netherlands

hi guys, My 63 Savoy has greyish painted torquestruts; i have a spare set, that also has about 50% dark-greyish paint left on them...looks 100% factory original. is this an original finish? I thought they were always bare. I have seen many guys that restored their cars make the struts...

hi guys, i took the tank out of my 63 fury parts car; zero dents, and under the undercoating, the zincklayer looks like new. On the top it has some surfacerust. The inside of the tank was full with 20 year old gasoline and 2 pounds of carbon residue... Is it possible to separate the 2 halfs...

hi guys, what do the painted numbers on a 833 4-speed mean? I would like to put them on my transmission. thanks, Marcel

hi guys, I am not building a dragracer, but a nice 63 Savoy MW Clone. i am gonna build an engine for my car in the near future; what i want: 1963 426 c.i. wedge, compression +/- 10:1 going with a crossram with 2 edelbrock 650 carbs MW exhaustmanifolds with a 3-inch exhaust nice cam...

hey guys, A friend of mine got me a 426 street wedge engine; it needs the usual bore/honejob; i have got info on how to get pistons for this engine, but they are more expensive than 440 pistons ( in comparison ) Is it possible to have the 426 bored to 440 specs and stuff in 440-pistons or...

hey guys, does anyone know if 63 plymouths also had bodycolor-overspray on the undercarriage? I know that cars were factory dipped/painted in a greyish primer, and after the car was painted bodycolor, the undercarriage would be partially painted/oversprayed, but the most of the undercarriage...