• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. khryslerkid

    Hulk Hogan won't be down for breakfast

  3. khryslerkid

    Did Sidney actually do that burnout?

    What burnout?
  4. khryslerkid

    Pattern Check… Isle 8-3/4

    It's not always easy to get the same pattern on coast and drive. Go with a good pattern on the drive and the coast ends up where it is. Drive pattern will come up under acceleration so halfway is good. The last three I've done only one set worked out near perfect on the drive/coast. They were...
  5. khryslerkid

    Tools Explained

    Still not for sale that I could find. The inventor was looking for feedback since 2018. Wouldn't take much to make your own if you have the skills.
  6. khryslerkid

    Wiper Blades

    Trico makes the "Classic" that should fit those. I've seen them at several parts stores that carry Trico.
  8. khryslerkid

    Hulk Hogan won't be down for breakfast

    Who could forget this night? WWF wasn't the same after The Hulk left. RIP Hogan
  9. khryslerkid

    The Roach

    How did you make out with the power steering problem?
  10. khryslerkid

    The Prince of Darkness won't be down for breakfast

  11. khryslerkid

    The Prince of Darkness won't be down for breakfast

  12. khryslerkid

    heat or no heat for the intake

    I'll sacrifice a cold natured startup for boiling, vapor locking, evaporating fuel in the carb. My cast iron manifold is blocked off.
  14. khryslerkid

    Leaking master cylinder mystery

    I see you're using Dot 5. I've had the same problem with my dual MC 4 drum. It has to be the synthetic that gets past the cap's seal. Just like synthetic motor oil that finds its way past gaskets and seals unlike conventional oils. I flat sanded the top of the MC with 400 grit and the seal...
  15. khryslerkid

    Sundays......

    I'll be here every Sunday!
  16. khryslerkid

    heat or no heat for the intake

    Sounds like a timing issue as in vacuum advance not coming in.
  17. khryslerkid

    440 6 Pack squealing noise only when completely warmed up

    Vacuum leak could do this. Check vacuum lines, carb and manifold ports and carb gasket. Check carb bolts/nuts. Pcv can do it also. Good luck.
  18. khryslerkid

    Need help finding replacement part for water pump housing.

  20. khryslerkid

    Any old timers recognize this tool?

    The knurled pattern you see on some crank shafts are to help direct the oil into the engine.
  21. khryslerkid

    "I'm a doctor, not a brick layer"

    Tonight's episode
  22. khryslerkid

    Any old timers recognize this tool?

    Ebay has a couple of Ford and GM ones. $30 - $40 bucks.
  23. khryslerkid

    Any old timers recognize this tool?

    Crankshaft Rear Seal Forming Tool
  24. khryslerkid

    I smell like Ben Gay

    I've dealt with some sort of pain most of my life and didn't realize it was RA. A couple of days after doing something repetitive or strenuous I would wonder why I'm hurting. Had to think back a day or two to remember what I did. Before I was diagnosed with RA my go to was Aleve. Now I'm on...
Back
Top