Search results for query: *

For Sale: Pair of Mopar big block heads Casting number: 3462346 No Rocker Arms or Shafts - Just Valves Price: $80 obo

For sale is a master cylinder for manual brakes. The master cylinder and cap have been fully restored (including coloring cast grey body and yellow dichromate cap) and ready for install. Location: Metro Detroit Price: $260

I have an original 1973 and up RH big block engine mount bracket. The bracket has been media blasted and appears to be really clean - no pitting. The Chrysler part number is 3642814. Location: Metro Detroit Price: $30 OBO

For sale is a 71 and up B & E-Body master cylinder for manual brakes. The casting number is 2229271, which correct for 71-75 B-Bodies and 71-74 E-Bodies. The master cylinder and cap have been fully restored (including coloring cast grey body and yellow dichromate cap) and ready for install...

For sale are a pair of BB headers that were on a 70 B-Body with 440 (auto) for 30+ years that did have much run time (under 500 miles). Location: Metro Detroit Price: $250 OBO

For sale is a 71 and up B & E-Body master cylinder for manual brakes. The casting number is 2229271, which correct for 71-75 B-Bodies and 71-74 E-Bodies. The master cylinder and cap have been fully restored (including coloring cast grey body and yellow dichromate cap) and ready for install...

I have (2) sets of 11" x 3" asbestos brake shoes available that are replacement shoes that will not damage your drums like some of the other shoes available. These are similar to the OE style shoes. Location: Metro Detroit Price: $75/pair

For sale is a 8.75 rear axle housing for a B-Body (62-70) that has been cleaned/painted and ready for final assembly. The housing is very clean with no pitting. Price: $400 obo Location: Metro Detroit I can deliver to the Mopar Nats next week.

For sale are a pair of front 11" x 3" Drums and Shoes for a B or E-Body. The drums and shoes are still new in the box. Location: Metro Detroit Price: $180 for the pair of drums and $85 for the pair of shoes (I have two sets of the shoes and one set of drums)

For sale are a pair of upper and lower controls arms that have been cleaned/painted and are ready for final assembly. Location: Metro Detroit Price: $375 obo I will separate the set, if you only need the upper or lower control arms.

For sale are a pair of original B-Body lower control arms with the sway bar tabs for a 1970-1972 B-Body (including 70-74 E-Body). The LCAs are clean and ready for installation. Location: Metro Detroit Price: $260

For sale: Is a pair of big block HP exhaust manifolds that have been media blasted/painted cast grey. Heat riser is still installed. Left Manifold: 2951865 (1970-1971 HP manifold) Right Manifold: 2899879; (1970-1971 HP manifold) Location: Metro Detroit Price: $600 obo

For sale: Is a pair of big block HP exhaust manifolds that have been media blasted/painted cast grey. Left Manifold: 2951865 (1970-1971 HP manifold) Right Manifold: 2899879; (1970-1971 HP manifold) Location: Metro Detroit Price: $650 obo

For sale is an original 4-groove Big Block Crank Pulley that has been media blasted and painted. The pulley is ready for assembly to your Mopar big block. The pulley has provisions for a power steering pump and A/C compressor. Please email me for additional information/photos. Location...

I have an original 1973 and up RH big block engine mount bracket. The bracket has been media blasted and appears to be really clean - not pitting. The Chrysler part number is 3642814. Location: Metro Detroit Price: $50.00 OBO

For sale is a 1968-69 A, B, C-Body 383 Intake Manifold 4-Barrel (casting# 2806301). The intake has also been signed by Don Garlits (in 2014). Please note black tape at the bottom because someone wrote 360 on the intake with a yellow paint marker. This is obviously not a 360 because it does not...

For sale is a new/reproduction engine compartment wire harness for a 1970 B-Body. This wire harness has all the correct leads/routing for your 70 B-Body Big Block Mopar with a 4-barrel carburetor. Please note there is an extra lead for those that wish to install an electronic ignition setup...

I have a BB chrome pulley kit that includes the following: 1. Crank Pulley 2. Water Pump Pulley 3. Alternator Brackets 4. Coil The set came off a 69 440 engine assembly. Location: Metro Detroit / Mopar Nats Price: $125 obo *New chrome pulley sets are $320+ I will have the parts with me at...

I have a stock 69 & 70 Dodge B-Body BB drive shaft assembly for a 727 and 8.75 setup. The drive shaft measures 52" from center to center. The casting number is 2996162. This drive shaft has the correct factor swedge/tapper end. Dri Please PM if you want additional photos or info. Location...

For sale are a pair of 383/400/440 stock heads with a casting number of 3462346. These heads are correct for a 1971 - 1972 BB Mopars. Please note the heads have been covered in WD-40 to prevent corrosion, which makes areas look a little dark. A majority of the grease/debris has been removed...