Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not that model plastic filter, you will see its sort of glued to the cap. the outlet end, had a piece of that glue come loose and stopped the needle from closing this spring fuel everywhere, there's another plastic filter that has like the bottom a metal cap on each end. i ended up getting a...
Hi Team
I know I’m better off having the glass out however, with the trim removed, how much of a pain in the a** Is vinyl top install???? It certainly would be more meticulous gluing it down around the front and rear glass. Car is new from paint and I don’t want to install a vinyl roof just yet...
Finally had a chance to get back in the car today and think I've zeroed in on my question. The interior wiring has been hacked to hell so it's hard to tell what goes where without tracing it.
Given the MyMopar wiring diagram for 69 Coronets, I go "off the map" in the spot labeled as weirdness...
I have noticed or at least convinced myself that the Edelbrock dual 4 air filter does not flow enough for my application. I made a baseplate that allows the use of a round 14" x 3". I came to this for the reason that the Edelbrock air valve secondaries did not flow enough air to pull fuel. I...
Back in the day, the Mrs (Maricopa County AZ-440) and I (So California-426 hemi) ran high detergent, straight 30 weight Pennsylvania oils. Pennsylvania based oil, like Kendall, were good to go. For this part of Arizona, 440 uses Royal Purple HPS 10W-40 engine oil.
FWIW, my gen 5 LS3 Camaro uses...
The Harrisburg Mecum was a little all over the place with prices. I didn’t look that car over, can’t say if it was good or bad. There were more Roadrunners and 70 Dodge B bodies that I’ve seen at one auction. Plenty of Mopar inventory at this one. 2 Hemi 68 RR’s did less than $130k. Both looked...
using the factory unit that came with the car. it blows cold enough to feel it on your fingers but not on your face. I need to know where I can get new ductwork and make the blower motor move a little bit faster on high