Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Orient the block with the wires so the plugs face into the engine compartment and the two 4 circuit plugs are towards the passenger side. The block should have a triangular shaped pin that sits in a notch in the hole through the firewall. It should also have two mounting screws on it that will...
First poke around and see how extensive the rust is. It's always more widespread underneath than is visible. That will tell you if you can get a way with patching things with sheetmetal or should find some replacement rails.
Hi Dan
My 1966 Coronet takes 158 bulbs from the factory.
So did your instrument panel take any of the 158/168/194 bulbs? If so, did you use the super brights? Polarity issues with the 158/168/194 bulbs?
Or was it all BA9s? How did they work out?
Thanks, Ben
Just up I64 and 30 North, Aylett. VA
1969 Dodge Coronet
Bench Seats
318
904 Auto
4 wheel drum brakes non-power
I purchased this about a year ago as a side project. It had been sitting for several years and my goal was to get it running and pass it on to the next lucky guy. I feel I'm at that point now.
I have all the seats newly...
It's not super common, but just like in your fridge the stuff that gets put in first ends up in the back and sometimes gets overlooked and not used until later.
Since I got to the Lehigh Valley, EVERY GODDAM CRUISE OR CAR SHOW has been rained out.
I’m going home to Commiefornia to escape the kids and the weather.
You can reinstall the wire harness plug. Be sure to bend the tabs that secure the wires out a little bit before pressing the wire into the plug
Column is now complete until the steering wheel is added which includes the horn ring and button
Here is a new 5 piece rallye dash bezel set.this set has a pebble grain finish.these bezels are all in show condition and do not appear to have ever been installed.
That being said the radio bezel has 1 missing screw boss and glovebox bezel has 2 missing screw bosses
$400 shipped
Located in...
After the bearing is installed you can slide the bearing and rubber cover down into the slot in the upper column housing. Then the retainer that holds the bearing and turn signal switch down can be fastened with the 3 Phillips screws
The turn signal lever can be installed if wanted. One longer...