Search results for query: *

Well then I owe you a beer, too :) Thanks DB.

Sweet! Winning!

In Saskatchewan we can get 15 12 oz cans for 32.00. And it comes from another Province. That’s probably about 24.00 US. Didn’t bother to look up the exchange rate.

Ok got the Argon CO2 mix (thats a story unto itself). Did two quick welds (yes I know they are cold). And guess what I found……when you weld up spring steel even just two quick tacks the spring steel is no longer spring steel. It snapped as soon as I put pressure on it to insert it in the hole...

Just wondering what front speakers everyone is running. Using an aftermarket sony deck and hertz 6x9’s in the rear The dash has the 2 smaller outside grills for smaller speakers ( 4’’ ) and a larger one in the center? Not into the Retrosound stuff Thank you

Steering wheel turns 1 1/2 turns to right and only one turn to the left what could be wrong

Hi Everyone, Unfortunately Mopar night is postponed until next week August 6th.

My question is, were the mirrors installed at the factory before shipment? Or did the dealership install them? A very knowledgeable friend who has his original 66 Charger sent me his measurements of the passenger side mirror, and it was different from the driver’s side. I have read that some...

Wow, you mean beer brewed in your own country costs more than what i have been purchasing if for, here in California, USA?

@71RRHI ........ head for high ground! 8.7 magnitude earthquake near Russia prompts tsunami alerts in Hawaii, Alaska and West Coast

Tom

Yes as Wayne indicated the mirrors are in the FACTORY location. So they were useless out of the gate? WTF?

What’s the reason you want to use hard lines from the fuel pump to filter? Or have the filter in a specific location? Mine definitely doesn’t have hard lines. Less likely to leak?

I would like to know some specifics regarding the automatic drivetrain combinations used in say Roadrunners with 340’s. What rear end and torque converters (stall specs) were used along with engine compression ratios and camshafts specs if possible. Thanks MF

Tom

Wish we could buy our own beer that cheap up here...

Made a few changes since this picture.

Where all the brake lines connect it sounds like the brake distribution block. There is a switch on the block that a wire should connect to.

Like I said yesterday, I show it in full...

It's in factory position... just useless.