Search results for query: *

The linkage shown in the diagram from the service manual in post #3 is the layout for your 1974 Charger with the knob/button shifter. Chrysler switched from the knob/button shifter used in the 1970 E-bodies to the plastic T-handle for the 1971-1973 B-bodies and E-bodies, then changed back to the...

Not all 727's have accumulator springs. So no spring or blocker rod would not cause a 2/3 slip. Does it have a restrictor in the high/rev clutch feed port in the case? Did you pressure check the KD band servo for pressure in 3rd gear? Doug

F off with the Spanish digs Bob. Maybe learn the language and some etiquette.

I'll have to look up fluid film..I've never heard of it? All our trucks are getting old and I hate the thought of a newer truck with the emissions garbage. As far as the frame I think we've had enough oil leaks to preserve it! :p . I bought this one at a truck auction in '07 when it was 10...

In this case, I would troubleshoot backwards. Fuel system first. From tank to carb, everything must be pure, clean fuel. As mentioned, I'd start at the tank forward. And see AT THE CARB, what the fuel system is sending it.

That cat better hope I don’t get my hands on him. Walking all over my car. What’s wrong with him?

nice, Thanks

Care to explain how high fuel can hurt a pump diaphragm?

Jimmy's Bullet allegedly had four Cadillac mufflers. Imperial mufflers I suspect would do the same job.

On a positive note if you chose to move the car scene at least in the Denver area is pretty good, and there is an abundance of great roads with incredible scenery waiting to be explored...

Very cool. Never seen a cat repowered IH. In the early 80's Dad had a John Deere 5020 that had a m&w conversion kit with 3160 Cat V8. I spent a lot of time on it. Dad sold it when farming got tough in the mid 80s. I have wondered if its out there somewhere? It would be quite a collector piece...

if you do have high pressure, probably blew the accelerator pump diaphragm in the carb

2002 - I was 39 and the Mrs was 36. We refinanced it twice. The first time was only a year after we bought it, dropping the rate considerably. The second time we shaved 7 years off the note and dropped the payment a little more. We're set to have it paid off in less than 2 years and can ride...

In 1973 the 340 had reduced compression (don't remember the ratio but you can look it up), and a shot peened cast crank with external balancing. The heads also had smaller valves. IIRC, the horsepower was rated at 240. I was 16 when I started driving it, and over time I added headers and a...

regulator and gauge would be a great start

Just an FYI: If anyone is doing a 67, the preformed carpet for the rear console is not very easy to install and not nice when done. I came up with a way to cover using a roll of carpet and think it turned out a lot better. Formed carpet: and...

what's base timing? what's total timing? what's fuel pressure at the carb? if its an electric pump, could be too much for the carb. have you pulled the spark plugs to read them?

72RoadrunnerGTX..... There are just too many self appointed "experts", such as Dead Dodge Garage, trying to explain how the Mopar charging system works and the several orders of magnitude the number of people that believe in what's being proclaimed as gospel. The best thing for these people to...