Search results for query: *

I didn't know there were ANY parts available from Mopar for these old engines anymore.

I'll post a for sale ad on FBBO later this week.

The mirror base, 337649, is common to both manual and remote LH mirrors as per manual mirror threads I saw on FABO & FCBO. Rummaging around ebay I found the actual assembly part number, as well as some incomplete info model fitment. Found the following after rummaging around other websites...

It has been done the other way, and I suspect the Imperials were the way you mention mainly because that was the easiest solution for OEM space wise as others have noted. My goal would be the best configuration, and what that is has yet to be proven. Adding a third would likely get you close...

Some Imperials have small mufflers/resonators ahead of the regular muffler and Imperials have 440's and are very quiet. I took note of that and put 12" glass packs in front of the turbo mufflers in my '70 Roadrunner. I like the way it sounds now, but if I ever want it more quiet, I can still put...

It is, trust me

One thing that gets over looked is the tube fit. On the tube if factory will be a brace that fits/ bolts to the bell housing and is held by a bell housing to block bolt. If your bracket does not just lay in place at that bolt hole once the tube is pushed into the pan if you have draw it flush...

I like the look of the car except how thick the rear of it appears. The Challenger is a thick and tall car compared to the 68-70 Chargers. The Chargers taper off at the trunk whereas the Challengers are more bulky. There have been a few of these made. I have seen at least several posted in a...

So I should have 12 volts at each lead to that switch?

I recently purchased a 71 Charger. The previous owner put a new harness from American auto wire in it. I found out that the alternator wasn’t charging the battery so replaced it with a 3 wire alternator with no fix. Checked the voltage regulator and it checked bad so replaced that but still...

2nd vote for automotive touchup. I bought paint for the Newport and it matched quite well.

Yes we will take a very good look at them for you. Give us a day or so..... it's been busy here. Thank you!

Ahhhh there she is.

How about aluminum 75cc chamber heads instead of your current 88-90 cc chambers? How much more compression do you need? How much cam duration do you have? Have you done a compression test to see what your numbers are now? A duel-plane intake should also increase your low to midrange torque as...

The longest case that will fit. Dynomax Super Turbo if you can add a resonator for the drone. Long ultraflows will be tame until you get on it. The Pypes Race pro if they built it in a longer case.Same with the Borla Pro xs. I have 18" magnaflow to go on my Duster but not installed yet. On my...

That's great, you got it in and that was the intention. Once you figure out how the two pieces go together on the bench and what is the top and the bottom, take it apart and install the top, but have the lower part loose inside the dash. Once the top is secured, then assemble the bottom to it...

That's dangerous.